Top-rated floor polishers.

Get matched with top floor polishers in Salem, KY

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Salem, KY?

Select your specific project to find the pro for you.

Find Floor polishers in Salem

Floor Polishers questions, answered by experts

Costs depend on floor type, area size, and additional services like waxing or sealing.

If you’re cleaning or repairing laminate floors, avoid anything abrasive like heavy-grit sandpaper or steel wool. Because the image layer is protected by a topcoat, the image layer is more vulnerable to scratches and damage if the topcoat is damaged. And if the image layer is scratched, it can reveal the wood fiber core.

No, you cannot use bleach on Dekton. Avoid harsh chemicals when cleaning and treating Dekton. Such chemicals are unnecessary since Dekton is highly stain-resistant and nonporous. Instead, use a mild solution of water and soap or vinegar when cleaning your Dekton countertops and dry thoroughly with a clean cloth.

Buffing will only remove scratches at the surface level of your flooring. You may also need to apply hardwood floor wax to restore the wax layer. To remove deeper scratches, you’ll need another floor repair method like sanding; however, if you sand the floor, you’ll also need to stain and seal it.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

The Salem, KY homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.