Top-rated deck repair pros.

Best deck repair pros near Pineville, KY

Enter your zip and get matched with up to 5 pros

Need a pro for your deck repair project in Pineville, KY?

Select your specific project to find the pro for you.

Top-Rated Deck repair pros in Pineville - Updated Nov 2026

Jenga Construction & Demolition
5.0(
6
)
Deck or Porch - RepairDeck or Porch - Repair - For Business

Serving Pineville, KY and surrounding areas

Approved

In business since 2023

Free estimates

Offers commercial services

"They showed up on time explained the plan they had for the repair finished the job in an acceptable amount of time and cleaned up afterwards the price was very affordable very friendly and courteous, great guys very respectful.I would hire them again and I highly recommend them."
Response time8 hrs
Recommended by100%of homeowners
...
Showing 1-10 of 67
Deck Repair FAQs, answered by experts

Before installing any materials under the deck for removing moisture, you should perform some prep work on the ground. Work the dirt under the deck to create a grade away from the home. A grade of at least six inches for every 10 feet works well. Do not leave a gap between the dirt and the home’s foundation where water could pool. Once you or a contractor regrades the dirt under the deck, you then can add materials over the top.

Most building codes require that railing spindles (also known as balusters) on decks or stairs be spaced no more than four inches apart. This safety standard is often called the '4-inch sphere rule,' which means a sphere with a 4-inch diameter should not be able to pass through the opening between balusters. This rule is in place to prevent small children and pets from slipping through the railing. For the same reason, the space between the bottom rail and the deck or floor surface should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is essential to check your local building codes to ensure compliance before starting your project.

The time to build a vinyl deck varies based on factors like size, the complexity of the design, and weather conditions. Generally, a straightforward project might take a few days to a couple of weeks for preparation, installation, and any necessary inspections. However, larger or more intricate designs may extend the timeline. Timely acquisition of permits, efficient planning, and coordination with contractors will all help to make the construction process as smooth and quick as possible.

The proper and most comfortable height for a deck stair riser, also called a step, is between four and seven inches. A height of seven inches is often considered ideal for a strain-free step that minimizes the risk of trips and falls. While it is possible to have risers up to 12 inches, this height can be challenging for children, pets, or individuals with mobility issues. For optimal safety and comfort, pair a seven-inch riser with a tread depth (or run) of at least 10 to 12 inches. Always check your local building codes, as they may have specific requirements that differ from these general recommendations.

Deck skirting shouldn’t touch the ground, especially if you have a wood deck, which is vulnerable to moisture. Ideally, you should leave at least 3/4 of an inch of space between the deck skirting and the ground for more ventilation. Pros also recommend that you incorporate about 1 square foot of space for ventilation for the underside of the deck to every 150 square feet of decking. Proper ventilation prevents mold growth and rot that can damage your deck.

The Pineville, KY homeowners’ guide to deck repair services

From average costs to expert advice, get all the answers you need to get your job done.