Top-rated drywall insulation pros.

Get matched with top drywall insulation pros in Wilson, KS

Enter your zip and get matched with up to 5 pros

Need a pro for your drywall insulation project in Wilson, KS?

Select your specific project to find the pro for you.

Find Drywall insulation pros in Wilson

Avatar for Air Tight Of Kansas
Air Tight Of Kansas
4.5(
13
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Wilson, KS and surrounding areas

Approved

In business since 2000

Free estimates

Warranties offered

"First off the job I was wanting done was a small job. I installed a window in the mud room and when I removed the paneling in the wall to cut the hole for the window, I found unexpected voids in the wall from the previous work. I also put up a stud wall in the west of the mud room. My original plan was to fully insulate with foam the mud room because it was the only room in the house left exposed to outside temperature changes. I expected to pay fully for the work.
Chris, owner and president of Air Tight, came over to give me a proper estimate for the work I wanted done. I showed Chris all that I wanted done from the garage end first and then I showed him the wall with the newly installed window. He noticed the voids in the wall and was surprised because his company "does not do substandard work," as Chris put it. I was prepared to pay for the new work I wanted done, but he told me Air Tight of Kansas would do it for free.
Air Tight of Kansas stands behind their work more than a 100%. I could not be happier with the insulation. The house stays  warmer in the winter and cooler in the summer with the new heating and cooling system without sky high bills. There is no more creaking or popping with the change in temperature any longer. As an added bonus to the foam insulation, there is less movement do to strong winds, one can hardly hear the wind or rain for that matter.
The employees are excited about their product and that excitement I picked up on at the Home Show, where I was introduced to foam installation as a retrofit option. The cost was reasonable and I expect to pay less in gas and electricity for heating and cooling over the next few years.
I highly recommend Air Tight of Kansas for new construction and remodeling for your insulation needs.
"
Residential Home
Metal Buildings
Metal Buildings
Metal Buildings
Metal Buildings

+2

Response time2 days
Response rate100%
12 neighbors recently requested a quote
Circle Star Insulation
5.0(
1
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Wilson, KS and surrounding areas

Approved

In business since 2001

Free estimates

Customers say: Quick response

We are a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. We offer a variety of general contractor services that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!

Response time10 mins
Recommended by100%of homeowners
Saline Valley Insulation
5.0(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Wilson, KS and surrounding areas

In business since 2017

Free estimates

Small jobs welcome

We pride our company on reliability, communication, integrity, and quality work. We strongly believe in giving our absolute best in all our projects, no matter how big, or small. We are experts in our trade and will always keep you educated on your task or project. We look forward to earning your business.

21 neighbors recently requested a quote
Avatar for Vantage Point Exteriors
Vantage Point Exteriors
3.8(
122
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Wilson, KS and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"This is the 2nd time I have used VantagePoint Exteriors to install windows for me.  First time was in a condominium and from an Angie's Big Deal.  Loved the windows and they did a good job so used them again when I bought a house.  I gave a B on price but they are competitive with other companies.  Double hung, double paned windows are just plain expensive.  The windows are awesome and are Heartland windows.  But windows are only as good as they are installed.  My crew (Willy, Justin, and Anthony) were truly superior. I was there the entire time and I know they went above and beyond. I had a beautiful bay window put in where I had a triple window.  It is unbelievably good looking and they had to do extra work because of how heavy it was.  Built knee braces and insulated and trimmed it out in the interior because it needed wider trim. Truly did an great job. Justin and Anthony are hard working, polite, young men. Willy knows everything there is about installing windows (and is a joker too!). It did take almost 2 months for my windows to come in after being ordered but that's just how it is.  I'm sure the window company (in the good ole USA, Iowa) is busy because they truly make a great product. VantagePoint now does siding also which they did not do when I had my first windows installed. They are much busier this time around as it is a husband-wife team but they want to do right by their customers.  You may have to ask for something or remind them of something that needs done but it will get done.  They will be back at my house this fall to finish up my last 8 windows.
"
Additional Photos
Before Vantage Point got the call
Another happy homeowner!
Before Vantage Point got the call.
Another happy homeowner!

+38

Recommended by73%of homeowners
Avatar for Hill Foam and Coatings LLC
Hill Foam and Coatings LLC
5.0(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - InstallInsulation - Install or Upgrade

Serving Wilson, KS and surrounding areas

In business since 2023

Free estimates

We specialize in closed cell and open cell spray foam insulation, roof coatings, and waterproofing on new constructions to remodels, barns, cabins, metal buildings and foundations. Can travel across the United States. Certified and insured

Bedroom insulation
Bedroom insulation
Bedroom insulation
Bedroom insulation
Response time1 day
Response rate100%
Recommended by100%of homeowners
Superior Drywall And Insulation
2.0(
2
)
Blown-In Insulation - Install or UpgradeInjection Insulation - Install

Serving Wilson, KS and surrounding areas

In business since 1987

Free estimates

Credit card accepted

Superior Drywall and Insulation offers fast, friendly and courteous service. We use only the best products and are always eager to answer your questions and concerns. We have built our reputation on our commitment to providing quality service, which has earned us an impressive reputation with many valuable customers. We take pride in delivering value through top quality, dependable work with excellent price and reliable, honest service.

Response time5 hrs
Recommended by100%of homeowners
Showing 1-10 of 14
Drywall Insulation questions, answered by experts

There are several things you should not do when installing drywall. Common mistakes include: adding too many screws, over-sanding, not adding backing support, and installing drywall unevenly. You also should avoid screwing into the same place twice, installing Sheetrock with tapered edges on the outside, and making too many joints.

If you only have tiny holes in your drywall (for example, dents or nail marks), you probably won’t need a patch kit. Instead, you can plug the hole with a small amount of spackle. Once the spackle dries, you can sand the area and paint over it—just like you would in the steps outlined above.

Most handy homeowners can tackle removing texture from unpainted walls. Removing texture from painted walls is a bit trickier. Paint acts as a sealant, so you can’t soften the texture with water. Instead, you’ll have to add a layer of drywall compound known as a skim coat. This process is messy and takes some practice.

There are several benefits to wet-sanding drywall, but the main perk is that it produces far less dust than dry-sanding. As a result, wet-sanding poses fewer health risks and makes less of a mess in your home. Plus, damp sponges are less abrasive than sandpaper, so there’s a smaller chance of scratching or damaging the drywall paper. Wet-sanding also creates a smoother finish than dry-sanding.

Although they have similar applications, spackle and joint compound are not the same. Their primary differences lie in their composition, consistency, and ideal use cases.

Spackle is composed of gypsum and binding agents, making it thicker than joint compound. It dries quickly and is easy to sand, which makes it ideal for small wall repair projects like filling nail holes or patching minor damage.

Joint compound, also known as drywall mud, consists of limestone and gypsum. It is primarily used for large-scale projects, such as taping and finishing the seams on newly installed drywall. It tends to shrink more than spackle and can be more difficult to spread.

While both products can be used to fill small depressions and cracks, spackle cannot replace joint compound for taping and mudding new drywall. Conversely, you can often use joint compound for small patching jobs typically done with spackle.

The Wilson, KS homeowners’ guide to drywall insulation services

From average costs to expert advice, get all the answers you need to get your job done.