Get matched with top pressure washers in Ness City, KS

You don't technically need to seal your driveway after pressure washing, but doing so will help keep your driveway clean for longer. The best driveway sealer depends on the type of driveway you have. To seal asphalt, consider an asphalt emulsion sealer, fast-drying sealer, or latex acrylic sealer. Concrete driveways commonly use acrylic sealers or penetrating sealers.

No, pressure washing isn’t recommended for cartridge filters. The high pressure can damage the filter paper, and the gentler pressure from a regular garden hose will work to rinse the cartridge filter. If the cartridge is very dirty or has algae or mineral buildup, you can use a muriatic acid solution to soak the filter and remove the buildup.

You could void your roof warranty using a power washer if you have a newer roof. With an older roof, you could knock loose older shingles. On the other hand, some people safely use a pressure washer to remove moss from a metal roof. Although you may want to use a pressure washer, the truth is that you probably don’t need it to knock moss loose. A garden hose and brush will do the job just fine and in a safer manner than a pressure washer.

The amount of pressure, measured in psi, that you should use depends on what you’re washing. Very tough materials like concrete, stone, and masonry can handle a high psi of 2,500 to 3,000, but materials like wood require a bit of a lighter touch. To clean your wooden deck, you’ll want to use your pressure washer on the lowest setting, around 600 psi, especially if it’s made of soft wood like pine or cedar.