Get matched with top pressure washers in Elwood, KS

If you don’t thoroughly clean your deck surface before staining, debris, grease, and mildew can get trapped on top of the wood. As well as looking unsightly, the stain won’t effectively penetrate the wood surface. You won’t have such a well-protected deck, and you’ll likely have to restain sooner. Beyond just the appearance and adhesion issues, any existing mold or mildew left untreated can continue to grow beneath the new stain, potentially leading to wood rot and structural damage over time, ultimately shortening the lifespan of your deck and requiring costly repairs.

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

Yes, you can pressure wash with just water. The force of the water alone is often enough to remove dirt, grime, and debris from many surfaces. However, for tougher stains like grease, mildew, or algae, adding a detergent or cleaning solution can enhance the cleaning power. Be sure to use the appropriate nozzle and pressure settings for the surface to achieve the best results without causing damage.

Experts agree that spring and fall are the best times to pressure wash a home’s exterior due to the mild weather. Line up a pressure washing project once every year, anywhere from March to November, for the best results. This will vary by location, but aim for a warm, dry season, whenever that may be in your climate.