Get matched with top garage pros in Downs, KS

To properly maintain an epoxy garage floor, regularly sweep up dirt and debris using a broom and dustpan or a vacuum cleaner. Mop with warm water and scrub away stains using a mild cleaning solution that's safe for the epoxy product you have installed. Don't use any soap-based or chemical cleaners, as these can cause the epoxy surface to deteriorate more rapidly.

If you open your garage manually, you don’t need sensors. If you have an automatic garage door opener, sensors are required by law. The federal law UL 325 mandates that all residential garage door openers in the U.S. must include sensors. Designed to prevent accidents and reduce the risk of entrapment, the sensors should be able to reverse the motion of the garage door within two seconds of detecting an obstruction. The sensors are there to keep you, your family, and your belongings safe from a door that might otherwise come down too hard or too fast.

If your cement garage floor is sinking and cracking, your first step should be to call a local structural engineer to assess the problem. They can determine if it’s a minor amount of sinking related to normal settlement or if the issue is structural in nature. If you do have structural damage, the engineer or a foundation repair company that you hire will come up with a plan to fix the issue, which often consists of mudjacking for less severe issues or underpinning for more extensive problems.

Garage door sensors should be installed on each side of the door, typically six inches off of the ground. The sensors communicate through an infrared beam, so they need to face each other directly for the system to work properly. Make sure they’re level and aligned, and keep the area around them clear. If they’re too high or out of alignment, your garage door won’t function properly.