Get matched with top interior painters in Atchison, KS

Linoleum adhesive is quite stubborn, so you may have to try several different methods for removal. You can start with a wallpaper steamer and steam it off or add laundry detergent to water and let it soak into the adhesive. You can try paint thinner directly on the adhesive for about 10 minutes and then wipe away.

You can remove powder coating with a chemical stripper, in a burn-off oven, or by sandblasting. Chemical strippers can remove most powder coatings in 20 minutes or less. But they are harsh and must be treated with care.

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

Pressure washing is the best way to remove paint that’s already peeling from certain types of vinyl and aluminum siding and some masonry. However, if the paint is largely intact and not yet peeling, or if your siding material can’t withstand the pressure, you may need to use other methods, such as chemical paint strippers, a heat gun, a paint scraper, or sanding.