Get matched with top drywall pros in Van Buren, IN

Drywall installation is considerably faster and more affordable than plastering. Because plastering involves applying a wet material, it’s more time-consuming, takes longer to dry, and is more prone to cracking. It doesn’t tend to be as insulative either. If you need resurfacing work done on the walls, it's not unusual for the cost of plastering to hit $10 per square foot, which is much higher than the drywall installation costs of $1.50 to $3 per square foot.

If you’re looking for good soundproofing and want a high-end look in a historic home, though, plastering may be the better option.

Yes, you can usually add a pocket door to an existing wall if it’s not load-bearing. If you don’t know, check with a professional. Installing a pocket door on a non-load-bearing interior wall is easiest, with no hidden electrical, plumbing, or ductwork. If you don’t know how to check this, hiring a pro to check for you or completing the project is best.

It is more difficult to drywall a ceiling than it is to drywall a wall, but not so hard that DIYers can’t tackle it. One of the main issues with hanging drywall on your ceiling is getting it into place. Drywall isn’t light so, if you are hanging full drywall panels, you will need at least two (it’s better with more) people to hold the panel while you drill it into the ceiling as a single piece can weigh between 40 and 60 pounds and will need to be held in place for up to 10 minutes.

Yes, taping inside corners is a critical step in the drywall installation process.  Properly taping inside corners is essential for achieving a professional look, and an installation that resists cracking and maintains its integrity over time. Taping the corners involves the application of a joint compound along the seam where two drywall pieces meet. This process provides reinforcement, conceals the seam, and prevents future gaps or cracks from developing.