Best countertop and backsplash pros near Newburgh, IN

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Fortunately, there are many types of heatproof countertops. Granite, quartzite, concrete, and stainless steel are all fiery contenders. These surfaces work best in busy kitchens where hot pots, pans, and baking sheets are part of the daily routine. Plus, their durability means you get a long-lasting work surface that won’t flinch at a bit of heat or heavy use. However, many stone and concrete counters require a sealer, which is typically not heatproof.

The short answer is yes. A stone-safe, pH-neutral cleaner and a soft cloth are all you need to clean and maintain terrazzo. Harsh cleaners aren’t necessary. You can also apply stone polish every few months to refresh your terrazzo.  

It’s recommended that you clean your terrazzo countertops daily to remove dust before it begins to build up. Dust and other debris can cause small scratches over time. If you spill something, be sure to clean it up immediately before stains set in.

The best finish for butcher block countertops depends on their intended use. If you plan to use the surface for food prep and cutting, a food-safe oil like mineral oil or tung oil is recommended. These oils provide a water-resistant, velvety matte finish but require regular reapplication. If the countertops are primarily for appearance or serving, a stain can add color and sheen. Polyurethane is another option, but it tends to show scratches more prominently, making it less ideal if you plan to cut directly on the surface.