Get matched with top drain cleaners in Francisco, IN

Baking soda and vinegar aren’t just great for making a volcano for your kid’s science project. You can also pour this dynamic duo down your shower drain to dissolve hair clogs. If that doesn’t do the trick, you can step it up with a commercial liquid drain cleaner. 

A good option for opening up and cleaning a sink drain is to use a ¼ cup of baking soda and 1 cup of white vinegar, along with a rubber stopper to cover the drain while those materials work their magic. After about 15 minutes, you can flush the drain with hot water. In many cases, these materials can scrub out minor clogs and get the drain working properly again. If the issue persists, call in a plumber near you to get the problem permanently fixed.

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Start by unscrewing the overflow valve, which is located on the wall of your tub between the floor drain and the tub spout. Gently insert a plumbing snake down into the pipe, move it back and forth, and pull it out. Remove any hair, debris, and soap scum that comes out with it. Repeat the process until the snake comes out clean, and then reinstall the cap on your overflow valve.