Get matched with top locksmiths in Burns Harbor, IN

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

If you also have a standard door leading to your garage, install a robust deadbolt lock and reinforce the frame with security plates. Then, secure any windows with shatterproof glass or film to deter break-ins. Consider a smart garage door opener for your car entrance, enabling remote monitoring and control through your smartphone. Motion-activated lighting around the garage to deter intruders is a great way to amplify these security efforts. Lastly, educate your family on security practices, such as keeping the garage entrances closed and locked.

When you take a key to a hardware store or a locksmith for copying, you can expect the key-cutting process to take as little as 30 seconds. The key copier will review your current key to decide on the correct blank. Then, your original key and the blank are inserted into a key duplication machine to cut an exact key copy. When it’s all said and done, you can have a new key in your hand in just a couple of minutes.