A fence installer or homeowner should place a snow fence upwind of the desired drift area, while keeping the prevailing wind direction in mind. When installing a snow fence, its posts should be sturdy, as they will be the weakest areas in terms of tensile strength. Posts should be buried at one-third their height and placed no more than eight feet apart.

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

Pickets should sit at least 2 inches off the ground to encourage groundwater to flow underneath. Pickets can sit as much as 6 inches off the ground, but setting it any higher could let pets in or out of your yard unintentionally. These are not to be confused with the fence posts anchored underground with soil or concrete footing.

Yes, fence posts need to be installed below the frost line to ensure stability and prevent heaving caused by freezing and thawing cycles. The frost line is the depth at which soil freezes during winter. By placing posts below this line, often around 3 to 4 feet deep or as recommended for your specific region, you reduce the risk of the ground shifting, which can lead to leaning or unstable fences. Adequate depth provides better anchoring and helps maintain the fence's integrity, ensuring it remains secure and upright throughout changing seasons.