Top-rated mold testing and remediation specialists.

Get matched with top mold testing and remediation specialists in Philo, IL

Enter your zip and get matched with up to 5 pros

Need a pro for your mold testing and remediation project in Philo, IL?

Select your specific project to find the pro for you.

Find Mold testing and remediation specialists in Philo

Avatar for Pure Maintenance of Central Illinois - USA Mold Service
Pure Maintenance of Central Illinois - USA Mold Service
4.9(
12
)
Mold & Toxic Material TestToxicity and Mold - RemovalIndoor Air Quality Testing+2 more

Serving Philo, IL and surrounding areas

Approved

In business since 2019

Warranties offered

Credit card accepted

"We called Pure Maintenance when we discovered mold in our attic and they were very responsive to our Angi request. They came out promptly, did a thorough review and provided photos of the mold extent. Unfortunately, they were not able to perform all of the services we wanted to have done so we opted for a different provider. I would recommend them for light mold restoration - everyone was very courteous, knowledgeable and professional."
Bedroom Dry Fogging
Mold Stain Removal Treatment
Mold Stain Removal Treatment
Christmas Living Room Dry Fogging
Dry Fogging

+80

Response time1 day
Response rate86%
32 neighbors recently requested a quote
Avatar for Guardian Preservation Services, Inc.
Guardian Preservation Services, Inc.
3.9(
16
)
Toxicity and Mold - RemovalToxicity and Mold - Removal - For Business

Serving Philo, IL and surrounding areas

In business since 2005

Emergency services offered

Warranties offered

"The team was prompt in both arriving at the work site and performing the remediation. They were very helpful in explaining what was to be done and what needed to be done. I would use them for future mold remediation on any of my other properties."
 Mold on Wall
Mold in the Kitchen
In the Attic
Attic
Between the attic joists

+1

Recommended by100%of homeowners
Mold Solutions
0.0(
4
)
Toxicity and Mold - Removal

Serving Philo, IL and surrounding areas

In business since 2002

Mold Solutions, the premier mold inspection company in the Midwest is your first choice for all of your Toxic Mold Testing needs. We are professionally trained and accredited as mold inspectors and we will work with you to identify any current or future risk to your home and family. As people have become more aware of the health risks involved with toxic mold many contractors have billed themselves as mold testing professionals. Make sure that you work with a qualified mold tester to get the most comprehensive testing done on your home.\nCall Mold Solutions today!

Purcell Service
4.6(
19
)
Dry-rot, Water or Pest Damage - Major Repair

Serving Philo, IL and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"The technician arrived on time and promptly began diagnosing the air conditioning system. When freon levels were checked, it showed that the levels were showing an over charge of the system. When some of the freon was bled off, the numbers went all over the place. The tech cleaned the air conditioner using our own hose, which was not put back in its proper place after he was through with it. We were then advised that we would have to "wait and see" if their repairs would have any effect on the ability of the air conditioner to keep the inside temperature below 79. The tech left and advised they would be back later in the day, or the next day. We paid the bill for the service call and the cleaning of the air conditioner, even though our hose was used. That was $152. After several hours, it became evident that the repairs were having no effect. We waited until 5pm for a phone call regarding a follow-up. At that point we called Purcell, and were told that a tech would be out to follow up. When he arrived, he looked at the system again and couldn't uncover any new issues. We then asked for a quote for a new air conditioner/furnace. At this point, the techs savvy car salesman like skills were quite evident. In addition, they don't participate in the current Ameren Act-on-energy rebates, which would add up to $800. To make up for this, the tech offered a $100 off his total price for the estimates, which ranged from $3400 to $17000. Over the next few days, we had 4 different companies come out to give us estimates on new air conditioners. One company wanted to inspect the current air conditioner we had, to ensure that nothing could be done to the current unit. Upon inspection, it was found that the compressor of the air conditioner was not functioning, which would not allow any tech to get accurate freon readings. This explains why Purcell was receiving errant readings. My question to Purcell is this: What exactly did we pay 152 for? The tech should have recognized that a part as big as a compressor was not running, but he missed it. So long story short, we paid $152 to Purcell for them to mis-diagnose an air conditioner and for them to use our hoses to spray water at the air conditioner unit, and then not put the equipment away. We chose this company due to their good ratings on angies list, but I feel this review should serve as a red flag to any of you who are considering Purcell."
Recommended by84%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)
Dry-rot, Water or Pest Damage - Major Repair

Serving Philo, IL and surrounding areas

In business since 1971

Credit card accepted

"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Showing 1-10 of 22
Mold Testing and Remediation questions, answered by experts

Knowing what to expect during a mold inspection can help make the process easier. Prepare by closing doors and windows for 48 hours, turning off HVAC systems for at least two hours, and avoiding disinfectant chemicals for at least 48 hours. 

The mold inspection process takes between 24 and 48 hours. Your professional will check walls, fireplaces, air ducts, vents, and windows for visible spores. They will also take an outdoor base air sample. Your pro will send these samples to a lab for testing and advise you on the findings.

The primary signs of mold in an ice machine is a musty odor, slime buildup, and discolored ice. If you notice any of these signs, clean your ice maker immediately.

Yes, mold can grow under your shower tiles if they aren’t thoroughly waterproofed. Even if you have a durable, non-porous tile material, water can make its way through grout or gaps around the edges of the shower. This will slowly erode the grout, which can cause tiles to come loose. It can also trap moisture behind tiles, and within a day or two, mold and mildew can rapidly grow.

Pellet stoves burn compressed wood byproducts, making them very efficient and clean-burning. However, even efficient combustion still produces fine dust particles, which could have an effect on the health of vulnerable people in your household, such as infants and people with asthma. A wood stove pro can help determine whether the levels in your home are unsafe.

A mold inspection costs an average of $660, with a typical range between $300 and $1,025. However, costs can be as low as $150 or as high as $2,800 depending on several factors. These include the size of your home, the type of mold, the extent and accessibility of the affected area, your location, and the number and type of samples required. Hard-to-reach areas like air ducts, crawl spaces, and wall cavities can increase the cost. Specific tests have different prices; for example, swab testing typically costs $200 to $300 per area, while more extensive air testing can range from $250 to $700. A thorough inspection is crucial for determining the scope of the problem and identifying the best remediation method.

The Philo, IL homeowners’ guide to mold testing and remediation services

From average costs to expert advice, get all the answers you need to get your job done.