Get matched with top gas log pros in Petersburg, IL

Replacing a gas valve on a water heater will take a professional plumber between 1 and 1½ hours. However, they may require extra time to diagnose the problem with your water heater, particularly since so many of the surrounding parts work together. Speak with your plumber before the job to confirm the pre-hour price and the approximate length of the job.

Yes. There are a variety of standard pipe sizes used in plumbing. The main supply line connecting your home to the street is either 3/4 or 1 inch in diameter. Supply lines are 3/4 inch in diameter. Individual components are 1/2 inch in diameter. Meanwhile, your main drainpipe is often 4 inches wide. Most shower and bathtub drains are 2 inches in diameter, most toilet drains are 3 inches in diameter, and most sink drainpipes are 1 1/4 or 1 ½ inches in diameter.

This is a matter of personal preference, as each method has its own pros and cons. Oil furnaces are safer, but the smell can be off-putting to some consumers. Oil is also more expensive than gas. However, oil furnaces boast a higher BTU rate per hour, so a smaller amount of oil can heat a larger space when compared to a gas furnace.

Although a gas company supplies gas to homes, connecting gas appliances, like a dryer, is not their responsibility. The primary role of a gas company is to safely deliver gas to a property and maintain the gas supply lines up to a specific point, typically the gas meter or shut off valve. The task of installation is usually taken on by the homeowner or professional dryer installer.