Get matched with top pressure washers in Percy, IL

Most deck lumber is softwood that you can easily damage with the spray from a power washer. Most power washers, though, have a lower pressure setting that’s relatively safe for deck materials if you’re careful to hold the nozzle at least a foot from the surface and continue moving without hovering in one area. 

Yes, you can pressure wash epoxy garage floors. Most epoxy floors can be cleaned with a mop, but you may choose to pressure wash your floor if it is stained, has ground-in dirt, or is covered with mold or mildew. Before pressure washing, soak stains and dirty areas with a gentle cleanser for best results. Then use a pressure washer tip angled at 45 degrees and raise the spray nozzle to at least 18 inches off the floor to protect the flooring surface. You can also use a surface cleaner power washer or rotary scrubber to prevent overspray. 

Pressure washing your home or fence can make a major difference in the appearance and may even help extend the life of the structure you’re cleaning. Some of the most common areas that people pressure wash around their property include:

• Driveway: $100–$250

• Patio: $100–$200

• Fence: $150–$300

• Gutters: $50–$150

• Roof: $450–$700

• Siding: $150–$1,400

• One-story house: $150–$750

• Two-story house: $400–$1,400

• Three-story house: $700–$1,800

The amount of pressure required to wash your siding depends on the material. Vinyl siding, as well as brick and stone exteriors, can handle high pressure of 2,500 to 3,000 psi, especially if you’re not worried about damaging paint. Wood and aluminum siding needs a gentler approach and shouldn’t face more than 1,500 psi.