Get matched with top pressure washers in Evansville, IL

A good PSI for a pressure washer will depend on the job you're doing. Pressure washer PSI ratings range from 1,300 to 4,200 PSI. Lower PSI is suitable for cleaning dirt and debris off of softer materials. Use a low PSI when pressure washing vinyl siding , wood, or stucco. A heavy-duty job like cleaning graffiti off of concrete or brick will require at least 2,000 PSI.

No, pressure washing isn’t recommended for cartridge filters. The high pressure can damage the filter paper, and the gentler pressure from a regular garden hose will work to rinse the cartridge filter. If the cartridge is very dirty or has algae or mineral buildup, you can use a muriatic acid solution to soak the filter and remove the buildup.

Your deck may look or feel fuzzy after pressure washing because the high-pressure spray tears some wood fibers as it removes the outer layer of dead and discolored wood. This fuzzy effect is a normal part of the pressure-washing process and will go away on its own in a few weeks. You can opt to spot-sand your deck if you’d like to remove it more quickly.

You can put a gentle cleaner such as distilled white vinegar, dish soap, or a degreaser in your pressure washer in a detergent injector. The attachment will mix your detergent with the water and spray it out. If you have stubborn stains on your driveway, a gentle cleaner in the attachment can help dissolve and remove those stains. Rinse the area with the pressure washer.