Get matched with top glaziers in Percy, IL

Yes, it is possible to repair a damaged or cracked mirror, but whether you should do it yourself depends on the extent of the damage. For minor issues like small chips, cracks, and scratches, you can use a DIY approach. Resin-based repair kits can fix minor cracks, while scratches can often be removed with metal polish, nail polish, baking soda, or a glass polisher. Always follow the manufacturer’s instructions for the best results.

However, for more significant damage, DIY repair is not recommended. Repairing and resilvering mirrors is a delicate process that can involve caustic chemicals and requires a high level of precision. The materials for a DIY attempt can cost over $100, which may not be a significant saving compared to hiring a professional. Since a failed attempt could result in more damage and higher repair costs, it is often better to hire a mirror repair expert from the start, especially for large, valuable, or extensively damaged mirrors.

Size and weight are the primary considerations when purchasing a bathroom mirror. Properly measure the mirror size that will fit above your vanity. If your vanity sits in front of a drywall without a stud available, you won’t be able to hang anything that is too heavy. Also, check the material and design. For LED mirrors, look up their IP value. The higher the number, the more resistant it is against water and splash damage.

You should avoid multi-surface cleaners, bleach, and any cloth or scrubbing material that has a rough surface when cleaning mirrors. Multi-surface cleaners and bleach will get smudges and debris off of the glass, but they more often leave behind cleaner residue because they don’t evaporate like a glass cleaner or rubbing alcohol. Additionally, any abrasive material or even the scrubbing side of a sponge can scratch your glass or coatings on the glass, gradually making the mirror look hazy.

Prior to the middle part of the 1900s, glass manufacturers used a technique that involved blowing glass into cylinder shapes that were then flattened out to create sheets used for windows and doors. This technique often left behind ripples and inconsistencies in the glass.