Best door pros near Pecatonica, IL

You can use a variety of wood to build a barn door, but the most common options include 1-by boards and 2-by boards for the backing and the decorative boards on the front of the door. Softwoods like pine will save you some money and should hold up well, while hardwoods like maple and oak will stand up to more wear and tear. You could also build the backer out of plywood to minimize the cuts you need to make. Whatever you decide on, make sure the width of the wood is compatible with the mounting brackets you buy.

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.

A prehung door is a door that comes ready to install, already mounted in its frame with hinges and stop molding included. Because everything is factory-aligned, installation is quicker, more precise, and convenient, as you don't need to drill or align the hinges yourself. This makes it a smart option if your current frame is damaged, uneven, or if you're working on a new build. Installation involves fitting the entire unit into the rough opening, shimming and leveling it, and then securing it. If you are replacing an existing prehung door, the process is even simpler, often just requiring you to swap the old unit for the new one and secure it with a few screws. Prehung doors typically cost only slightly more (around $20) than a door slab alone, making them an efficient choice.

You can determine what size storm door you need by measuring for the storm door. Take the width at the top, middle, and bottom of either your front door or an existing storm door, then measure the height on the left, center, and right of the door. Buy a storm door that matches your measurements' smallest width and shortest height.