Top-rated woodworkers.

Get matched with top woodworkers in Beardstown, IL

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Beardstown, IL?

Select your specific project to find the pro for you.

Find Woodworkers in Beardstown

Fix It Phillips Construction
5.0(
7
)
Carpentry Framing - InstallCarpentry Framing - RepairCloset - Build+3 more

Serving Beardstown, IL and surrounding areas

Approved

In business since 2020

Free estimates

Credit card accepted

"Allen installed the baseboard in a house owned by a family member of mine. Throughout the entire process, Allen was professional, accommodating and punctual. I was very impressed by the attention to detail that is evident throughout the installation. Allen went so far as to craft caps for some of the baseboard corners so none of the cut lines of the wood would show. He clearly sweats the details! it's rare to find businesses that provide quality work at prices that are very fair, and Allen delivers on all counts. I highly recommend Fix it Philips Construction based on my experience."
Response time7 hrs
Recommended by71%of homeowners
Ascended Constructions
5.0(
1
)
Carpentry Framing - Install

Serving Beardstown, IL and surrounding areas

Approved (Corporate)

In business since 2023

Offers commercial services

We’re a family owned and operated company that values honesty and integrity, and stands behind our work. We offer over 40 years of industry experience. We specialize in Asphalt Shingle Roofing installation, replacement, and repairs. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

201 neighbors recently requested a quote
Avatar for Earl Bernhardt Properties
Earl Bernhardt Properties
New to Angi
Custom Cabinets - BuildFurniture - Build Custom

Serving Beardstown, IL and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

Welcome to Earl Bernhardt Handyman Services!\nAt Earl Bernhardt Handyman Services, we take pride in providing dependable, quality workmanship at fair prices. From small repairs and home improvements to installations, trim work, painting, and general maintenance, we’re here to help get the job done right. Your satisfaction is our priority, and no job is too small!\n📞 Call today at 309-445-0158 to discuss your next project and get a quote. We look forward to earning your business!

New kitchen rehab
New kitchen rehab
New kitchen rehab
New kitchen rehab
New kitchen rehab

+1

6 neighbors recently requested a quote
Bakers HVAC Solutions Co LLC
New to Angi
Custom Cabinets - BuildFurniture - Build Custom

Serving Beardstown, IL and surrounding areas

Approved

We are native to central Illinois and deeply rooted in faith and family. We thrive on helping property owners maintain their investments by providing quality workmanship. With more than 20 years of experience in residential and commercial property maintenance, we are well aware the problems property owners in central Illinois face. We are your go to for nearly everything from the foundation to the roof and anything in between with a specialty in HVAC. We would love an opportunity to help you find a solution for all of your property needs.

Avatar for AOM Remodeling and Restoration
AOM Remodeling and Restoration
4.6(
52
)
Arbor, Pergola or Trellis - Build CustomArbor, Pergola or Trellis - Build Custom - For BusinessCarpentry Framing - Install+7 more

Serving Beardstown, IL and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"David gave me what I thought was a fair price for the work to be done. He asked for 1/2 up front. As a previous small business owner I did not feel this was unreasonable so I paid him 500.00. He estimated the work would take 3 to four days and I thought the same. After several no shows the "mason" showed up. The first clue was he came in a car. According to my wife he was here 2 hours and left, came back for another 2 hours the next day and left again. He said nothing to my wife about leaving or when he would be back. David called a day later to ask about coming out to look over the job and get the rest of the other 500.00. I said he isn't finished and he's only been here 4 hours. So then I looked up the prevailing wage in IL for a mason and found out it is 28.50 an hour. The next day the guy comes back for another 3 hours. David came to look at the work and I walked him around and showed him all of the places that had not been done. So the guy comes back again for about an hour. All told it was 8 hours work, nothing to write home about but it was agreed up front that I wasn't looking for an exposed brick look. I need it tuck pointed well enough so that I could drylock and paint the exposed brick. I will say this was done in the end. The worker left a mess that I and my wife had to clean up, I pointed this out to David as well. I told him I felt he was overly paid for the amount of work preformed and that was the end of it. It's really to bad. It's difficult to get contractors to do small jobs and I had plenty for him to do. I'm not unhappy, just would not hire again"
Kitchen accent
picture 1
picture 2
tan and white trim room
blue and white trim room

+5

Recommended by90%of homeowners
Avatar for Homemade Design
Homemade Design
3.7(
322
)
Furniture - Build Custom

Serving Beardstown, IL and surrounding areas

In business since 2006

Credit card accepted

"It is a waste of money. The great majority of people are not going to find any value out of the service. If you need design consultation, you need a full service consultation. If you already have knowledge and experience, and you just need to get a few ideas, then you don't need to pay for that. You can just get a magazine or a book since you already have the knowledge of basic designs in your head or a little bit of experience. To have someone call you and give you information over the phone, you are not getting the personal service that you need. You may as well take the money $49 and apply it to something else like getting someone else to come out and give you the service that you need. Because, you are not getting much, you are not getting anything at all. They are going to have you do the work. After talking to them and I was talking to other home designers, I found out that that was a waste of time and waste of money. I gave them a C because they didn't fail at what they do but they don't offer any value for what they do. There's not much value to it. The cost was fair. They didn't do a terrible job and the cost isn't terrible, it was only $49. It just has a very low value. For responsiveness I gave them a B because they will answer your phone and answer your emails."
Pennsylvania Master Bathroom
Boston Small Condo Kitchen
California Client Saves with HMD Designer Discounts
Recommended by54%of homeowners
Showing 1-10 of 43
Woodworking questions, answered by experts

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Most contractors do not charge for meetings, but it can depend on the project, mainly if it includes detailed consultations or project planning. For general estimates, homeowners shouldn't expect to be charged. Always ask up front about meeting fees to avoid surprises and ensure you know what’s included in the process.

Before hiring a carpenter, the most important thing is to make sure they are properly qualified and insured for the job. It’s more than reasonable to ask your prospective carpenter for customer references, as well as about their licensing and insurance. You should also consider choosing a carpenter that specializes in your specific project area to ensure high-quality results. 

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

The Beardstown, IL homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.