Get matched with top gas log pros in Anna, IL

The cost to repair a gas leak is $120 to $250 on average, but it could be as costly as $5,000, depending on the leak location and severity. 

For example, if you have drywall covering the source of the leak, you'll need to hire a contractor to replace the removed drywall. In addition, if the leak is underground, you'll need a contractor to excavate the ground to reach the gas line. 

Yes, you can have a gas line professionally installed to convert your traditional fireplace to natural gas; just know it’ll be an extra cost to budget for. The cost to run a gas line where you don’t already have one is about $540, though most homeowners pay between $260 and $820. Your total could be significantly higher if you don’t already have a main gas line running to your home.

Fixing a gas leak costs about $45 to $150 per hour for a plumber or gas line specialist. The job’s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about $120 to $170. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to $1,500 to $5,000. Keep in mind that gas leaks are very serious issues, so don’t hesitate to contact a plumber or gas line specialist immediately.

Almost all new buildings in California need an earthquake shut-off valve. The requirements for an earthquake gas shut-off valve (and who can install it) depend on where you live. For example, according to the Los Angeles Municipal Code, you’re required to hire a licensed contractor to install one whenever you build, sell, or renovate a home. Check with your local building department for your city’s laws on installing, permitting, and inspecting earthquake shut-off valves.