"Well. 1st plumber who looked at the system said shower valves needed to be replaced but that was a problem because there are no access panels. Chaub plummer advised valves were good quality and there was no need to replace. He replaced/installed new hardware and did a great job in a timely manner."
"Plumer was profession, friendly, on time, and did a great job. We have an unusual sink that was incorrectly installed years before we purchased the house, and he modified the new faucet so that it would work with the incorrectly cut granite countertop. A true professional"
"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."
Plumbing service and repair,water heaters, water softeners, recipes, remodels.We guarantee your satisfaction and we won’t leave until the job is done right. We pride ourselves on the quality work we provide, while delivering great customer service! Check out our services offered and call or click to schedule a free estimate today.
We are a small, (second generation) HVAC company specializing in Refrigeration and HVAC troubleshooting and repair. We charge by the hour or by the job using a flat-rate pricing catalog, we do not charge overtime fees and we are On-Call twenty four hours a day, seven days a week .We prefer to be payed at time of service, however arrangements can be made under the right circumstances. We also take credit cards.
Over 40 yrs. experience in all phases of remodeling and construction. Specializing in custom work to fit your home. Basement, kitchen, bathrooms, additions, whatever project you want or need for your home. References available upon request. Our Service area covers Northern Utah, Southern Idaho, Western Wyoming.
Yes, you can fit a vanity unit to an existing sink, especially if you plan to custom-build the vanity. With a prefabricated vanity, you’ll likely need to make a few adjustments. It depends on the type of sink, the size of the sink, and the existing plumbing. If you plan to retrofit a sink into a prefabricated vanity, make sure you take precise measurements and that your sink is compatible with the vanity you select. Prefabricated units have a precut sink hole, so you’ll need the size to match your sink.
You can choose a few different options for outdoor kitchen sink drainage. You can install a dry well about 10 feet away from your home or patio or install a French drain closer by. You can also drain into your home’s plumbing system, but it is more costly versus using a dry well.
If you have the patience and help to install a kitchen sink, you can do it yourself. This DIY project works best when replacing a sink that fits the existing hole, and the fittings and plumbing are in good condition. If you're worried about the plumbing's condition or aren't sure how to shut the water and power off to the garbage disposal and dishwasher, it's best left to a sink installation pro.
The time it takes to install a sink depends on whether you hire a professional or do it yourself, as well as the complexity of the job. A professional plumber can typically install a sink in 1 to 4 hours, with most routine jobs taking around 1 to 2 hours. However, more complicated installations will take longer. Projects that involve rerouting plumbing, installing an under-mount sink, or making countertop modifications can take a full day. Installing a sink with a prefab vanity could also stretch the project to 6 to 8 hours. If you plan to install the sink yourself, you should set aside 4 to 6 hours, though it could take longer. It's also recommended to have a friend help, especially if you are working with a heavy sink made of a material like porcelain.
No, all faucets are not compatible with all sinks. Because your countertops and your sink likely have a set number of holes already built in, you’ll need to find a faucet with the same amount of holes to work with your existing sink.
The Preston, ID homeowners’ guide to sink installation services
From average costs to expert advice, get all the answers you need to get your job done.
Sink installation costs depend on the type of sink, the material, and the labor. This guide can help you budget for your project—from pedestal to farmhouse.
Pedestal sinks are small bathroom wonders, but how much does a pedestal sink installation cost? Learn the cost factors for adding one to your bathroom.
Learn how to hire a qualified sink installation pro. Discover questions to ask, qualifications to check, and tips to find the best pro for your project.
Installing a new kitchen sink involves removing the old sink and putting in the new one. Follow these steps to learn how to install a kitchen sink like a pro.