Get matched with top asphalt driveway pros in Paul, ID

If you notice minor cosmetic problems with your driveway, you should seal it. Look out for cracks and holes on the surface, faded asphalt or concrete, and stains from oil and other chemicals. Replacing your driveway may be necessary if you’re dealing with significant problems—¼-inch cracks, large potholes, and puddles from drainage issues. The cost to install an asphalt driveway typically ranges between $4,200 and $9,000, significantly more than resealing. Consider talking to a professional to discuss whether resurfacing your driveway—a midway project between resealing and replacing—is a better option for you.

Three inches is a great thickness for a residential asphalt driveway that sees minimal to moderate traffic from cars, SUVs, and pickup trucks. However, a thicker driveway can better withstand the weight of a heavier vehicle, such as a trailer or a recreational vehicle. If you drive a heavy vehicle on a thin driveway, you risk cracking and damaging it.

Gravel driveways are significantly more affordable than asphalt driveways, making them an enticing financial decision when choosing your next driveway material. On average, gravel driveways are $5.75 to $13 per square foot cheaper than asphalt driveways. 

It's not just their price that makes gravel driveways more economical. Gravel driveways also can last up to 100 years with minimum maintenance, whereas asphalt driveways only last for 15 to 30 years with proper maintenance. But if you’re looking for the best driveway material for cold weather, asphalt may be a better choice.

Driveways should be sloped with a minimum 2% slope—anything lower will cause precipitation and runoff to collect. A 2% slope is the equivalent of a 2-foot rise over 100 feet. One quick way to check the integrity of your driveway’s slope: no more than four inches of water should collect on the surface longer than 15 minutes after rain.