Get matched with top structural engineers in Hagerman, ID

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: What is the typical process architects follow from concept to completion?

• <div><p>The process involves initial consultation, concept development, detailed planning, regulatory approvals, and integration of contractor work for project execution.</p></div>

Q: Is precast concrete reinforced?

• <div><p>Precast concrete can be reinforced with rebar, wire mesh, or other materials to improve its strength and add stability. Precast concrete for large construction projects is often pre-stressed as well for greater structural strength. Reinforced concrete is durable and strong, making it an ideal choice for many construction projects.</p></div>

Q: Can I do my own structural calculations?

• <div><p>No, it&rsquo;s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.</p></div>

Q: What is the hardest stage in building a house?

• <div><p>The early stages of building a house are harder than the later stages; laying the foundation and framing the house are two of the most challenging steps. However, it varies for everyone. Some people have difficulty installing HVAC, plumbing, and electricity, while others find it harder to plan the house and secure the necessary permits. </p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your structural engineering project in Hagerman, ID?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Hagerman, ID

*The Angi rating for Structural Engineering companies in Hagerman, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Hagerman, ID is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on December 06, 2025

Reviewed in August 2025
We purchased two new sliding glass doors at a home show. We wanted to replace ours because they were hard to slide open and closed. We have been VERY UNSATISFIED with Amazing Exteriors and REGRET ever buying them! They were a month late with the installation and never updated us to tell us when...
Amazing Exterior's of Idaho
Request a quote
Reviewed in March 2024
Great job done in a timely manner. Great men to work with.went above and beyond to fix structural issues at a very affordable price. Highly recommend
Mendez Roofing
Request a quote
Reviewed in June 2023
Awesome work and communication throughout the project. Could not meet a more friendly and awesome couple. There were removed several large trees overhanging fence lines, power lines, property lines, and structures. They did such a good job that I referred them to my fathers home for additional...
5C Tree Cutters, LLC
Request a quote
Reviewed in February 2014
Arrived on monday at 9am as agreed. Keith made quick work of the first side of the wall demolition. The most impressive aspect of his work throughout, and at the end of the first day; was how clean he maintained the work area! So, he worked quickly and cleaned things up as he worked. A very cool...
Hooked On Construction
Request a quote
Reviewed in September 2013
About a month ago the owner, Bob Potter, came to bid on the project. He offered suggestions and we agreed on what needed to be done. The evening before the work was done he called to say tomorrow is the day. Fortunately it worked out well for me. The short notice was a bit surprising. The crew...
ADVANTAGE TREE CARE
Request a quote
Reviewed in September 2013
Kept the car for 2 days to check the engine. Learned it was the gas tank and not engine. Very thorough
Lithia Chrysler Jeep Dodge Of Pocatello
Request a quote
Reviewed in August 2013
Jeff was very professional and had a good level of communication throughout the process. He is busy, and I had to wait a couple weeks before he could take my truck but it was worth the wait. He had the engine steam cleaned and called me with a preliminary diagnosis within a couple hours of...
Askew Machine and Perfomance-Jeff Askew South Side
Request a quote
Reviewed in July 2013
The work went well few if any problems; owner made a trip to local hardware type store to purchase special colored screws, while repair shop owner removed the engine from the boat; flashing pieces were installed and motor was reattached to boat. The result was even better than hoped for, I could...
Ultra Marine Performance
Request a quote
Reviewed in June 2013
After the safety check was complete, the salesperson came out with a form that indicated that there was a major leak of coolant and engine oil from a failed head gasket. The repair for the head gasket was quoted at $1600. Since I had never had a problem with leaking oil or overheating, I asked...
Phil Meador Toyota
Request a quote
Reviewed in April 2013
After months of sub-par performance from my regular mechanic, I was desperate to find a new one who could provide the kind of trustworthy service I used to have but lost. Some background: My old repair shop, Bill and Mike's, which I'd frequented for 20 years because of great service and...
MASTER MECHANIX
Request a quote

Find Structural engineers in Hagerman

Meier Architecture • Engineering

No reviews yet

Meier Architecture • Engineering

No reviews yet

1982 years of experience

Meier Architecture & Engineering, an Employee Owned company, is a full-service architectural and engineering consulting firm with Registered Architects and licensed Professional Engineers in Civil, Electrical, Mechanical, and Structural Engineering. Formed in 1982, has successfully completed more than 6,600 projects in the past 29 years. Meier Architecture & Engineering, an award winning company providing services from coast to coast, as well as worldwide, we are licensed in 28 states and serve as members of many professional, discipline-specific associations. Mindful of our future, members of our staff are also accredited in Leadership in Energy and Environmental Design (LEED).

Structural Engineering questions, answered by experts

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

The process involves initial consultation, concept development, detailed planning, regulatory approvals, and integration of contractor work for project execution.

Precast concrete can be reinforced with rebar, wire mesh, or other materials to improve its strength and add stability. Precast concrete for large construction projects is often pre-stressed as well for greater structural strength. Reinforced concrete is durable and strong, making it an ideal choice for many construction projects.

No, it’s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.

The early stages of building a house are harder than the later stages; laying the foundation and framing the house are two of the most challenging steps. However, it varies for everyone. Some people have difficulty installing HVAC, plumbing, and electricity, while others find it harder to plan the house and secure the necessary permits.

The Hagerman, ID homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Jeanine Gordon
•
Nov 24, 2025Nov 24, 2025
How Much Does It Cost to Hire a Structural Engineer in San Francisco? [2026 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total in San Francisco, CA.
Dan Simms
•
May 8, 2025May 8, 2025
How Much Does It Cost to Install an LVL Beam? [2025 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Dan Simms
•
Aug 14, 2025Aug 14, 2025
How Much Does a Structural Engineer Cost to Hire? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Rachel Hoffman
•
Nov 19, 2024Nov 19, 2024
Are Squeaky Floors a Structural Problem?
A squeaky floor may just be an annoyance, or it may signal a structural problem. Learn when to be concerned about a squeaky floor.
Dan Simms
•
Oct 31, 2024Oct 31, 2024
Everything You Need to Know About Lally Columns
Wondering what a lally column is? Learn what it is, how it works, when you need one, and the pros and cons in this simple guide.
Rachel Hoffman
•
Nov 13, 2024Nov 13, 2024
Who Can Check if a Wall Is Load-Bearing?
Before removing a wall, make sure it’s not load-bearing. Learn the benefits of hiring a structural engineer to check if a wall is load-bearing.