Get matched with top locksmiths in Okoboji, IA

A deadbolt differs from a regular lock in its design, construction, and security level. Regular locks are typically used for interior doors, such as for bedrooms and bathrooms, and provide minimal security. They are easy to install and use, often featuring a simple locking mechanism on the inside. In contrast, a deadbolt is one of the most secure locks you can install on an exterior door. Its internal construction is designed to withstand significant force, adding a crucial layer of security that can deter intruders. While deadbolts may be more expensive and complicated to install, they are cost-effective for the security they provide and are built to hold up to wear and tear.

There are many types of deadbolts, but these tips work on most. First, address any grime buildup. A bit of WD-40 will loose up rust and dirt so the deadbolt can turn. Inspect the door and frame alignment if this doesn't resolve the issue. Adjust the strike plate or the deadbolt's position to improve alignment. If the problem persists, disassemble the lock to inspect for damaged or worn parts. If you are unsure how to do it, hire a local locksmith.

If part of the key is protruding out of the lock, you can use a pair of needle-nosed pliers or tweezers to gently turn the key in the lock to open the door. If the key is fully inserted into the lock, you may also be able to use a key extractor to help turn the key into the unlocked position. 

But if the key breaks off halfway into the lock or you simply can’t reach it to help engage the unlocking mechanisms, you should probably call a professional.

If your door handle turns without opening, the most likely culprit is a loose or stripped spindle. This part connects the handles to the latch mechanism, and when it’s not properly engaged, turning the handle does nothing. Other issues might include a broken latch, loose screws, or even something small blocking an inner mechanism. In any case, it’s usually a matter of tightening, adjusting, or replacing a worn-out part inside the handle assembly—or calling in a professional to do it for you.