Get matched with top garbage collectors in Mcgregor, IA

These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.

Garbage disposals fit the drains of nearly every sink out there due to universal drain hole sizes of 3 1/2 to 4 inches, but the same isn’t true for the housing underneath the sink. You need plenty of room to fit a garbage disposal under there, so measure the space ahead of time and use those dimensions when shopping for a new model. If you’re replacing an existing model, get one in that size.

If your garbage disposal powers up and you can hear it hum, but the arms inside aren’t moving, the problem might be a stubborn clog, a build-up of grease, or a jam of the impeller plate. To troubleshoot these, ensure your unit is off and disconnected from its power source before checking inside the drain or attempting to manually rotate the impeller arms or plate from the underside of the unit. A hex wrench can help.

If the cost of repairing a leaking garbage disposal is close to the cost of replacing the disposal, then fixing the unit might not make sense. When deciding if you should repair or replace your garbage disposal, consider the age of your garbage disposal, the cost of the repair, and whether your garbage disposal has had other problems recently to help you decide if the cost of repairing the leak is better than the cost of replacing the disposal.