Get matched with top dryer vent cleaners in Guthrie Center, IA

Yes, you can snake a roof vent. This is one of the best ways to clear a problematic clog in a plumbing vent. You can either snake the vent by climbing on the roof and sending the plumber’s snake or auger directly down the vent opening, or you can cut a hole in the vent from inside the attic and snake it from there.

If you happen to disassemble your dryer vent and feel the inside of the duct immediately after drying a load of laundry, it will likely feel damp and warm. That’s normal, as the vent has just finished moving the humidity and moisture from your laundry to the exterior of your property. However, if your dryer vent has water droplets in it at any time, it’s a sign that there’s trouble with the machine’s ventilation. You should call in a professional right away to get the issue fixed.

Look for some common warning signs regarding a potential blockage when wondering how to check a dryer vent for clogging. If you are suddenly seeing more lint left inside the dryer and in the lint trap, you may have an active blockage. Additionally, if the dryer is taking longer than usual to dry clothing, a clogged vent may be the culprit. If the dryer is turning itself off because of overheating, this is a potentially dangerous sign of a blockage that requires immediate cleaning of the vent. Clogged vents could introduce a fire hazard.

You will know if your dryer is overheating by placing your hand on top to feel its temperature. If it’s hot to the touch, that’s a clear sign the dryer is overheated. Other signs include your laundry coming out hotter than usual, a burnt smell when it’s running, or burn marks on your laundry.