Top-rated deck maintenance specialists.

Get matched with top deck maintenance specialists in Gilbertville, IA

Enter your zip and get matched with up to 5 pros

Need a pro for your deck maintenance project in Gilbertville, IA?

Select your specific project to find the pro for you.

Find Deck maintenance specialists in Gilbertville

Avatar for Christopher White
Christopher White
New to Angi
Deck, Fence, Patio or Porch - Clean and Seal

Serving Gilbertville, IA and surrounding areas

Approved

Small jobs welcome

Offers commercial services

I've been doing handyman, construction, carpentry work for 16 years now. Over that time I've learned how to do countless different jobs and overcome various different snags and setbacks. Efficiency and dedication drive me and I will work as much as needed to meet a deadline.

Showing 1-10 of 30
Deck Maintenance questions, answered by experts

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Deck skirting shouldn’t touch the ground, especially if you have a wood deck, which is vulnerable to moisture. Ideally, you should leave at least 3/4 of an inch of space between the deck skirting and the ground for more ventilation. Pros also recommend that you incorporate about 1 square foot of space for ventilation for the underside of the deck to every 150 square feet of decking. Proper ventilation prevents mold growth and rot that can damage your deck.

Yes, deck pier blocks can be used as an alternative to traditional deck footings, especially for smaller or low-to-the-ground decks. Unlike poured concrete and buried post footings, deck blocks do not require digging or pouring. However, their use is dependent on local building codes. Some areas, particularly those prone to high winds, earthquakes, or hurricanes, may not permit the use of deck pier blocks. It is essential to consult your local building codes before choosing them for your deck project.

A deck that isn’t attached to a house is called a floating or freestanding deck. These standalone decks are built near ground level, so they usually don’t need deck stairs. Some don’t even require permits. Generally speaking, building a floating deck is faster and more DIY-friendly than constructing one that’s connected to your home.

Hangers are one way of attaching stair stringers to a deck. These metal hangers are usually adjustable, allowing you to find the ideal angle for a secure installation. They’re the best choice for installing longer staircases, such as one on a two-story deck, to reduce the load on the deck frame while keeping the stairs stable.

The Gilbertville, IA homeowners’ guide to deck maintenance services

From average costs to expert advice, get all the answers you need to get your job done.