Top-rated fountain pros.

Get matched with top fountain pros in Dunkerton, IA

Enter your zip and get matched with up to 5 pros

Need a pro for your fountain service project in Dunkerton, IA?

Select your specific project to find the pro for you.

Find Fountain pros in Dunkerton

Avatar for Bernd's Pond
Bernd's Pond
5.0(
11
)

Serving Dunkerton, IA and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"After several years of constantly replacing blown pond lights Bernd evaluated our situation and made a couple of recommendations. Following his recommendation and with his assistance all of our lights were replaced. The pond now glows beautifully from dusk until about 3am. We couldn't be more pleased."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+20

Recommended by100%of homeowners
Fountains questions, answered by experts

When deciding whether or not to turn off your pump, you should consider your area’s climate and the aquatic life in your pond. If you live in an area with freezing winter temperatures and don’t have any wildlife, keeping your pump on could damage it. If you have aquatic life but live in a colder climate, you might consider keeping your pump running and adding a pond heater.

In addition to length and width, pond liners also come in various thickness levels. Thickness is measured in mils, a unit of measurement equal to one-thousandth of an inch, with most pond liners ranging from 15 to 60 mils in thickness. The smaller the number, the thinner (and weaker) the liner. To prevent rips and tears, it’s best to choose a pond liner that’s at least 30 mils thick.

Yes, it is possible to make a fountain without a pump, though it may seem less intuitive and will require a bit more effort to use. In lieu of an electric pump, there are a few options including hand-cranked pumps or sprinkler systems that can work to provide water for a fountain.

Regular water testing, debris removal, and seasonal maintenance ensure healthy water quality.

Algae growth is a common issue for misters, but you can do several things to prevent it. First, use a sealed water tank with distilled or filtered water to fuel your misters. Second, blow out the misters after every use so no water is left in the tubing. Third, thoroughly clean the misting system every several weeks of use at minimum during the warmest months. Third, wherever possible positioning tubing and the water tank away from direct sunlight and in the coolest areas possible.

The Dunkerton, IA homeowners’ guide to fountain services

From average costs to expert advice, get all the answers you need to get your job done.