Get matched with top roofers in Cresco, IA

While the terms are often used interchangeably, wood shakes and wood shingles have notable differences, primarily in their manufacturing and appearance. Wood shingles are machine-cut on both sides, resulting in a smooth, thin, and uniform product. In contrast, wood shakes are typically hand-split or sawed on only one side, giving them a more textured, natural, and rustic appearance. Due to these manufacturing differences, shakes are generally thicker, heavier, and less uniform than shingles. They are also more expensive. Homeowners seeking a more rustic aesthetic often choose shakes, while those preferring a more uniform look may opt for shingles. Both are installed in an overlapping pattern to create a durable, weather-resistant roof.

Flapping shingles, or shingles that are lifting or curling away from your roof, can be glued back into place using roofing cement or sealant. Apply the glue underneath the shingle, then press it down firmly. You can leave a brick on top of the shingle to hold it in place overnight while the sealant dries.

The least suitable roof for solar panels is a wood shake roof. An electrical mishap with your solar panels could start a fire on the roof, so some areas don’t allow solar panels on wood roofs. You don’t have to let a wood roof stop you from going solar. You can replace your wood shakes with shingles. Installing the panels on the ground is another option.

A metal roof can last anywhere from 15 to over 100 years, with an average of 50 years, depending on the material, installation, and environment. The specific metal is a key factor: aluminum roofs may last 20 to 45 years, while steel can last 30 to 60 years. Tin can last for up to 75 years, and more durable options like zinc, stainless steel, and copper can last from 80 to over 100 years. Factors that can shorten a metal roof's lifespan include living in a coastal region with corrosive salt air, improper installation (such as laying over old shingles), and failing to inspect and replace fasteners, which may wear out before the panels.