Top-rated metal fabricators and restorers.

Get matched with top metal fabricators and restorers in Rocky Face, GA

Enter your zip and get matched with up to 5 pros

Need a pro for your metal fabrication and restoration project in Rocky Face, GA?

Select your specific project to find the pro for you.

Find Metal fabricators and restorers in Rocky Face

"Very good welder and excellent customer service 10 out of 10 "

_ _ on November 2025

Mobile welding fabrication, wood and metal construction, big projects, little projects, hand rails, decks, roofs, anything

"Very good welder and excellent customer service 10 out of 10 "

_ _ on November 2025


Avatar for CH Mobile Welding

CH Mobile Welding

5.00(
2
)
Approved Pro

CH Mobile Welding

5.00(
2
)
Approved Pro
Emergency services offered

CH Mobile Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business Feel free to call 7652995414 FREE ESTIMATES

"They were prompt--reached out almost immediately after I submitted the request and were available too. He and his colleague were courteous and professional. It was hard work and they got the job done. They were very nice young men. "

Penny J on October 2025

CH Mobile Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business Feel free to call 7652995414 FREE ESTIMATES

"They were prompt--reached out almost immediately after I submitted the request and were available too. He and his colleague were courteous and professional. It was hard work and they got the job done. They were very nice young men. "

Penny J on October 2025


CS Welding

New on AngiNew on Angi
Approved Pro

CS Welding

New on AngiNew on Angi
Approved Pro
Free onsite estimate

CS Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

CS Welding is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.


Avatar for Fisher Precious Metals

Fisher Precious Metals

5.00(
14
)

Fisher Precious Metals

5.00(
14
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Uncompromising quality and integrity in all of your precious metals purchases and sales. Specializing in gold & silver bullion. Avoid gold and silver retailers selling you their inventory at high premiums! We pay top prices for jewelry, sterling, diamonds and watches! Fisher Precious Metals is a national gold and silver dealer. Listed as a national dealer with the United States Mint, Fisher Precious Metals is a trusted resource for gold and silver coins and bars. Established in 1995, the firm works with individuals on all issues related to buying and selling physical precious metals, storage, security, estate liquidation and long-term exit strategies. John Fisher, the President, is an ICTA Board Member and is approved by the State of Florida to teach Continuing Education courses on precious metals investing to CFP's, CPA's, attorneys and insurance professionals. In addition, John is a frequent guest on various financial radio broadcast programs. Fisher Precious Metals is an A+ rated Accredited Business with the Better Business Bureau.

"It went great! We found Fisher Precious Metals on Angie's List, and after googling them, we found they had very positive reviews across the web. Although it was a 45 minute drive from our home, we felt it might be worth it, and it was. We made an appointment with John via email, arrived at 11:00, and spent just over an hour in his office. He evaluated the sterling silver set we had to sell and gave us what we felt was a very fair price. He'd given us an estimate on the value of the gold coins via email, and although the price of gold had fluctuated since he'd provided the quote, the final price was very, very close to the initial quote. We were happy to learn that they will also buy jewelry, as I have a few pieces I haven't worn in a very long time. We were very pleased with the entire experience and will definitely return to their company when we have gold or silver to sell, and we're happy to recommend them to our friends. One thing to keep in mind is that sterling silver sets are basically worth the price of the silver itself. We knew that going in, so we were not disappointed and, in fact, the price we received was a little higher than we'd expected."

Laura C on February 2018

Uncompromising quality and integrity in all of your precious metals purchases and sales. Specializing in gold & silver bullion. Avoid gold and silver retailers selling you their inventory at high premiums! We pay top prices for jewelry, sterling, diamonds and watches! Fisher Precious Metals is a national gold and silver dealer. Listed as a national dealer with the United States Mint, Fisher Precious Metals is a trusted resource for gold and silver coins and bars. Established in 1995, the firm works with individuals on all issues related to buying and selling physical precious metals, storage, security, estate liquidation and long-term exit strategies. John Fisher, the President, is an ICTA Board Member and is approved by the State of Florida to teach Continuing Education courses on precious metals investing to CFP's, CPA's, attorneys and insurance professionals. In addition, John is a frequent guest on various financial radio broadcast programs. Fisher Precious Metals is an A+ rated Accredited Business with the Better Business Bureau.

"It went great! We found Fisher Precious Metals on Angie's List, and after googling them, we found they had very positive reviews across the web. Although it was a 45 minute drive from our home, we felt it might be worth it, and it was. We made an appointment with John via email, arrived at 11:00, and spent just over an hour in his office. He evaluated the sterling silver set we had to sell and gave us what we felt was a very fair price. He'd given us an estimate on the value of the gold coins via email, and although the price of gold had fluctuated since he'd provided the quote, the final price was very, very close to the initial quote. We were happy to learn that they will also buy jewelry, as I have a few pieces I haven't worn in a very long time. We were very pleased with the entire experience and will definitely return to their company when we have gold or silver to sell, and we're happy to recommend them to our friends. One thing to keep in mind is that sterling silver sets are basically worth the price of the silver itself. We knew that going in, so we were not disappointed and, in fact, the price we received was a little higher than we'd expected."

Laura C on February 2018


Avatar for Providence Safe Rooms Inc

Providence Safe Rooms Inc

5.00(
8
)

Providence Safe Rooms Inc

5.00(
8
)
Customers say: Quick response
14 years of experience

Provider and installer of all steel tornado shelters, safe rooms, custom bunkers and walk-in gun vaults. We carry a full line of Guardian survival gear at our online storefront. ALL of our tornado shelters are made from 100% American Plate Steel. ALL are built and engineered to meet or exceed FEMA specifications to withstand an EF-5 tornado! It is our promise to simply offer the strongest and safest product possible to protect you and your family. We invite you to check out others, then visit us and see for yourself.

Provider and installer of all steel tornado shelters, safe rooms, custom bunkers and walk-in gun vaults. We carry a full line of Guardian survival gear at our online storefront. ALL of our tornado shelters are made from 100% American Plate Steel. ALL are built and engineered to meet or exceed FEMA specifications to withstand an EF-5 tornado! It is our promise to simply offer the strongest and safest product possible to protect you and your family. We invite you to check out others, then visit us and see for yourself.


John Anderson Service Company Inc

4.38(
24
)

John Anderson Service Company Inc

4.38(
24
)
Customers say: Quality work
47 years of experience

VOTED BEST CONTRACTOR IN NORTH GEORGIA by SEBC. John Anderson Service Co. has been in business for more than 32 years. We are TVA and Georgia Power approved contractors.

"The first person who came out did some work on the drain and it stopped leaking in the original location, but started leaking worse in a different location. I called again and The company sent a different person out. He said the first guy had done the repair wrong, and that it was fixed now. However the leak continued. Water was trickling down the interior walls of my house and onto the floors, doing a good bit of damage. I called again, and they sent someone out to look at it, and they told me that my roof was leaking, not the AC. I called out a roofer and a plumber, and neither found a problem. I called the company and asked to speak with the owner several times and never got a call back. The owner finally said he would come to my house with a technician, and he stood me up. I finally called a different AC repair company and they fixed the leak. I do not recommend this company. They do shoddy work, and are totally unresponsive to customer needs."

Marty B on September 2020

VOTED BEST CONTRACTOR IN NORTH GEORGIA by SEBC. John Anderson Service Co. has been in business for more than 32 years. We are TVA and Georgia Power approved contractors.

"The first person who came out did some work on the drain and it stopped leaking in the original location, but started leaking worse in a different location. I called again and The company sent a different person out. He said the first guy had done the repair wrong, and that it was fixed now. However the leak continued. Water was trickling down the interior walls of my house and onto the floors, doing a good bit of damage. I called again, and they sent someone out to look at it, and they told me that my roof was leaking, not the AC. I called out a roofer and a plumber, and neither found a problem. I called the company and asked to speak with the owner several times and never got a call back. The owner finally said he would come to my house with a technician, and he stood me up. I finally called a different AC repair company and they fixed the leak. I do not recommend this company. They do shoddy work, and are totally unresponsive to customer needs."

Marty B on September 2020


Maxsus Inc Roofing & Restoration

5.00(
4
)

Maxsus Inc Roofing & Restoration

5.00(
4
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Maxsus Inc. is a Roofing & Restorations company that has been built from the ground up with the specific intention of becoming the best in the industry at mitigating storm damage from wind and hail and offering our clients unmatched support with negotiating & navigating the difficult insurance claims process with their providers, ensuring that homeowners get the most value rewarded for damages to their properties. While the storm industry is our specialty, we also offer our expanding roofing knowledge & expertise to the renovations, new construction, and real-estate industries and seek to expand our clientele in these markets. Our skilled crews are highly trained in most modern roofing materials and applications including: architectural asphalt shingle, wood / cedar shake, composite, eco shake, clay tile, slate, composite slate, architectural metal, standing seam metal, & custom copper dormers, downspouts, and gutter systems for high end luxury applications. We have come to prefer working with the well known Certainteed product line & pricing structure to offer our clients the best rated product and value, but can fulfill any job request with custom quotes on all product lines, including GAF, Owens Corning, TAMKO, Atlas, & IKO upon request.

Maxsus Inc. is a Roofing & Restorations company that has been built from the ground up with the specific intention of becoming the best in the industry at mitigating storm damage from wind and hail and offering our clients unmatched support with negotiating & navigating the difficult insurance claims process with their providers, ensuring that homeowners get the most value rewarded for damages to their properties. While the storm industry is our specialty, we also offer our expanding roofing knowledge & expertise to the renovations, new construction, and real-estate industries and seek to expand our clientele in these markets. Our skilled crews are highly trained in most modern roofing materials and applications including: architectural asphalt shingle, wood / cedar shake, composite, eco shake, clay tile, slate, composite slate, architectural metal, standing seam metal, & custom copper dormers, downspouts, and gutter systems for high end luxury applications. We have come to prefer working with the well known Certainteed product line & pricing structure to offer our clients the best rated product and value, but can fulfill any job request with custom quotes on all product lines, including GAF, Owens Corning, TAMKO, Atlas, & IKO upon request.


Horseshoe Construction LLC

5.00(
5
)

Horseshoe Construction LLC

5.00(
5
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Our mission is to be a provider that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!

"David Robles and Horseshoe construction, did a very good job replacing our sidewalk. The sidewalk had to be taken out completely and a new walkway poured, the crew were very professional and thorough! I have already recommended them for another job!!!"

Doug D on July 2023

Our mission is to be a provider that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!

"David Robles and Horseshoe construction, did a very good job replacing our sidewalk. The sidewalk had to be taken out completely and a new walkway poured, the crew were very professional and thorough! I have already recommended them for another job!!!"

Doug D on July 2023


Avatar for Classic Copper Works

Classic Copper Works

3.69(
16
)

Classic Copper Works

3.69(
16
)
Customers say: Quality work
25 years of experience

Classic Copper Works uses time honored German copper smith techniques handed down from father to son and passed on to our highly skilled artisans. We specialize in the fabrication of custom copper & bronze products and other metal specialties. WE DO NOT OFFER REPAIR SERVICES OF ANY KIND. Additional phone number - (888) 908-5339.

"Ordered and paid for custom awning that was to take 5 weeks. Its now been 16 weeks and still waiting. Owner is at best noncommunicable and at worst, rude. I'm now wondering if this is a scam and not a real business."

rick k on March 2025

Classic Copper Works uses time honored German copper smith techniques handed down from father to son and passed on to our highly skilled artisans. We specialize in the fabrication of custom copper & bronze products and other metal specialties. WE DO NOT OFFER REPAIR SERVICES OF ANY KIND. Additional phone number - (888) 908-5339.

"Ordered and paid for custom awning that was to take 5 weeks. Its now been 16 weeks and still waiting. Owner is at best noncommunicable and at worst, rude. I'm now wondering if this is a scam and not a real business."

rick k on March 2025


Howard Heating

5.00(
2
)

Howard Heating

5.00(
2
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

We have a well trained well equipped staff. Our technicians are NATE certified and factory trained and can offer solutions to the most complex air conditioning and heating problems. We build all of our duct work in our shop, nothing is sub-contracted, so you know everyone who works on your job will be covered by our insurance. We offer 100% financing to qualified buyers.

We have a well trained well equipped staff. Our technicians are NATE certified and factory trained and can offer solutions to the most complex air conditioning and heating problems. We build all of our duct work in our shop, nothing is sub-contracted, so you know everyone who works on your job will be covered by our insurance. We offer 100% financing to qualified buyers.

Showing 1-10 of 50

FAQs for metal fabrication and restoration projects in Rocky Face, GA

Metal fabrication is a large umbrella term that can include bending metal, welding, cutting, stamping, drilling, forging, and casting. Metal fabricators often have quite a few pieces of specialized machinery and experience in the different forms of fabrication, which means they’re able to handle many different forms of metal work. An experienced metal fabricator might be able to tackle everything from creating metal siding or roofing from raw materials to constructing a custom wrought iron fence.

The average hourly rate for a metal fabricator is around $70, but the scope of your project will play a big role in your total costs. A good way to get an estimate for your metal fabrication project is to multiply the cost of raw materials by four. A quarter of your total typically goes toward material, and three quarters goes toward labor. Some factors that can influence your metal fabrication costs include the difficulty of your project, the metal you’re using, and your specified design.

A welder is a metal worker that uses heat and specialized tools to bind metal together, while a sheet metal worker more often uses cold methods to bend thin sheets of metal into shape for siding, roofing, or some other application. A metal fabricator might use one or both of these metal working techniques, along with others, to provide a wider range of services. In many cases, a metal fabricator is the most likely to be able to handle your metal project.

The Rocky Face, GA homeowners’ guide to metal fabrication and restoration services

From average costs to expert advice, get all the answers you need to get your job done.