Best fireplace pros near Conyers, GA

You should use an angled brush to first paint the mortar lines, then go in with a high-density roller to evenly paint the bricks one at a time. You can also use a flat paintbrush to paint individual bricks, but a roller is faster and easier to use thanks to its longer handle and wider surface area for coating the bricks. To finish, go in with the paint brush for edges or hard-to-reach areas.

There are several ways to determine if your chimney or fireplace damper is open or closed. A simple method is to check for airflow by placing your hand near the fireplace opening; if you feel a draft or hear wind whistling, the damper is open. An open damper might also make the room feel cooler, similar to the outdoor temperature, or cause your HVAC system to work harder than usual. For a more definitive test, you can try a visual inspection, although it may be difficult to see. Alternatively, you can light a small piece of paper and observe the smoke; if it is drawn up the chimney, the damper is open. Always use the damper handle to adjust its position.

Soapstone wood stoves hold onto heat the longest, which means you can burn less fuel and enjoy the warmth for longer. Additionally, catalytic wood stoves include a catalytic combustor that can reduce emissions and create a cleaner burn no matter what the stove is made of. Of course, the most efficient wood stoves also tend to be costlier up front—but they can still save you money in the long run.

There are several maintenance tips you should take to ensure your pellet stove's safety and proper maintenance. You should vacuum the ash pan every week to prevent overflowing and clean the stove and surrounding vents every three to four months. It’s also important to get a professional inspection every year and install a carbon monoxide detector close to your stove. Be sure to dispose of hot ashes in a closed metal container; store it outside, away from the house. Only use the pellets recommended by your stove's manufacturer, and follow any cleaning and maintenance instructions.