Get matched with top woodworkers in Starke, FL

Q: What tools and blades are needed to cut Corian?

• <div><p>Yes, Corian&reg; and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.</p><p>For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.</p><p>After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.</p></div>

Q: Is it normal for a contractor to ask for a down payment, and how much should you pay up front?

• <div><p>It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.</p></div>

Q: Are ceiling joists load-bearing?

• <div><p>Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they&rsquo;re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them. </p></div>

Q: Does a carpenter have to be licensed?

• <div><p>Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don&rsquo;t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">contractor licensing tool</a> to find out whether a potential carpenter is licensed in your state.</p></div>

Q: Is it easier to cut wood when it’s wet or dry?

• <div><p>Whether or not it&rsquo;s easier to cut wood when it&rsquo;s wet versus dry depends largely on the type of tool you use and the wood you&rsquo;re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw. </p><p>However, you might want to avoid cutting wood entirely when it&rsquo;s wet if you&rsquo;re pruning your tree. Sawing a wet tree that you don&rsquo;t plan on removing can also encourage bacterial and fungal growth and decay.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your woodworking project in Starke, FL?

Select your specific project to find the pro for you.

Verified Reviews for Woodworking pros in Starke, FL

*The Angi rating for Woodworking companies in Starke, FL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

*The HomeAdvisor rating for Woodworking companies in Starke, FL is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Woodworking needs.

Last update on May 22, 2025

Reviewed in May 2025
I was very impressed with their work the first time they cleared trees and was not disappointed this time. They showed up when scheduled and worked very hard to get the job done correctly. and without incidents. His wife works hard right beside him and are a great team. Brandon is extremely...
Broadwell FL LLC
Request a quote
Reviewed in September 2024
Elkin is an excellent worker who is conscientious about doing the job right. He did major work for me replacing decaying wood on my deck and in another room that I certainly would have lost in Hurricane Debby if it had not been for Elkinâ s superior work. Highly recommended!!
Omega Elkin LLC
Request a quote
Reviewed in August 2024
Paul was recommended to me. We talked over the phone and I gave him an of idea what we wanted on redoing cabinet doors , drawer face and counter top. We set up an appointment for him to come to our house. He brought a couple of door samples. One was made out of hickory wood with some dark...
Rennies Cabinets
Request a quote
Reviewed in July 2024
Great! Was here right on time. Did a great job with the wood (cedar) replacement and even secured loose soffits below the wood fascia. Also painted the new wood.
Edgyver llc
Request a quote
Reviewed in July 2024
I recently hired him to build a custom umbrella style plant stand for hanging flower baskets. His welding knowledge and experience helped me with fabricating this unusual item and the product exceeded my expectations! Excellent business to cover all your welding needs. Would definitely use them...
Freedom Mobile Welding, LLC
Request a quote
Reviewed in January 2024
Needed a complete replacement on a 600+ sq ft wood deck. Donald, one of the owners, quoted a very fair price for building a replacement deck with composite deck boards. And, was able to start quickly. Final project had an integral bench, railings, and lights. Project was complete in five days....
J Ingram Contractors
Request a quote
Reviewed in November 2023
Amazing! RxR was professional, timely and within my budget! RxR built my dream back porch with composite decking and I will go back every time I need something else completed! Highly recommend if you need an honest company who does high quality work!
RXR Construction
Request a quote
Reviewed in March 2023
Kingdom builders is an amazing company to work with. They are extremely prompt and knowledgeable about all the work I needed done. I definitely appreciate all their hard work and attention to detail. Their customer service is second to none.
Kingdom Builder, LLC
Request a quote
Reviewed in March 2023
Excellent work. House hasnâ t looked this good in a long time Definitely recommend and will certainly use them again
All Quality House Washing-Painting, LLC
Request a quote
Reviewed in December 2022
Great work done by this company. Professional, prompt service, on time, reliable, very professional, overall very impressive with fast and reliable service, I recommend this company to anyone needing help with tree removal services
Cdat Site Solutions
Request a quote

Find Woodworkers in Starke

Southern Rust Woodworks LLC

5.0(

)

Furniture - Build Custom

Serving Starke, FL and surrounding areas

Approved

In business since 2018

Free estimates

Credit card accepted

"Bubba has built several items for us. He is very professional, honest and trustworthy. The quality and intention of his work is some of the best Iâ ve seen. His pieces are truly Custom Built. Great guy and family business!"

Response time1 day

Recommended by100%of homeowners

Request Quote

Dixon Custom Installations, Inc.

4.6(

)

Custom Cabinets - Build

Serving Starke, FL and surrounding areas

Approved

In business since 1999

Free estimates

Warranties offered

Dixon Custom Installations, Inc., has over 20 years experience in the flooring industry, staffed with experienced seasoned flooring professionals. Our craftsmanship and attention to detail, reflects in our work. Our specialties range from wood flooring, laminate flooring, vinyl flooring and carpet installations, trim carpentry, general construction services of many kinds, and more.

6 neighbors recently requested a quote

Recommended by98%of homeowners

Request Quote

Robert D. Douglas Construction, Inc.

4.1(

)

Arbor, Pergola or Trellis - Build CustomCarpentry Framing - InstallCarpentry Framing - Repair+1 more

Serving Starke, FL and surrounding areas

Approved

In business since 1998

Free estimates

Customers say: Terrific value

"I highly recommend Bob! He built a beautiful large wooden wheelchair ramp for us. From start to finish he was very professional and kind. The ramp is everything and more we asked for from size, sturdiness, look, and safety. Excellent craftsmanship and he definitely looked at every detail before finalizing it. Also, he charges very fair prices. I will definitely use his services for any other large projects I have in the future."

Response time3 days

Recommended by96%of homeowners

Request Quote

Daly Stone Design, LLC

4.9(

)

Custom Cabinets - Build

Serving Starke, FL and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Mark and his team were fantastic. They did everything that we requested. They were very accommodating listening to our requests and following through on everything. There were problems from the original contractor and they fixed them for us. They found us more quartz to put a counter top in the kitchen closet to make more efficient and beautiful. He used his team Miriamâ s Maids handle deep cleaning of construction debris and such after a remodel done by another contractor went awry with a terrible mess in our entire great room. It was fantastic when they finished. They went out of their way to repair some antique tables that had damage to the legs. We were very pleased with all of them and have recommended them to other clients. You canâ t go wrong with them."

White Quartzite waterfall ends and mitered edges

Quartz waterfall ends & full height backsplash

Response time6 hrs

Response rate98%

30 neighbors recently requested a quote

Request Quote

Guerri's Antique Restoration

4.3(

)

Furniture - Build Custom

Serving Starke, FL and surrounding areas

Approved

In business since 1972

Free estimates

Credit card accepted

"This guy is the best! My 20 year furniture looks brand new. No one else would take on the work. This company did and nailed it (no pun intended). Highly recommend. Couldn't be happier. A+"

+49

Response time2 days

Response rate100%

2 neighbors recently requested a quote

Request Quote

Beyond Average Builders LLC

4.5(

)

Carport (Wood) - Build

Serving Starke, FL and surrounding areas

Approved

Super Service Award Winner

In business since 2014

Free estimates

Warranties offered

"It went great ! Clint and his crew do awesome work. I would definitely hire him again. He is honest, hard working, and reliable! Thank you Beyond Average Builders!"

Response time1 day

Response rate100%

3 neighbors recently requested a quote

Interior Trim and Decorative Moldings - Install

Serving Starke, FL and surrounding areas

Approved

In business since 2020

Free estimates

Emergency services offered

"Experienced a broken water pipe which flooded bathroom, hallway, and laundry room. Laminate flooring and 90 feet of baseboards was replaced by Already Finishing. Only company I could find that would do both baseboards and install laminate flooring. Highly recommend for quality of work at very reasonable price."

+30

Response time2 days

Recommended by100%of homeowners

Request Quote

United Contractors Network LLC

4.8(

)

Interior Trim and Decorative Moldings - Repair

Serving Starke, FL and surrounding areas

Approved

In business since 2010

Free estimates

Emergency services offered

"Got a better price in galvanized Metal"

6 neighbors recently requested a quote

Request Quote

Granite Transformations

3.7(

)

Custom Cabinets - Build

Serving Starke, FL and surrounding areas

Approved (Corporate)

In business since 2004

Free estimates

Warranties offered

"I had Granite Transformations install new custom cabinets and countertops in my salon suites, Mosaic Salon Studios. The well made cabinets and countertops really make the suites look more upscale and I love the stain and heat reaistant features. I am very happy! Everyone was competent and professional."

Terra Chiara counters and full backsplash

Counters, full backsplash, cabinet reface

Under mount sink with a brushed nickel finish faucet and pull out sprayer

Transitional kitchen with mahogany stained wood cabinetry, beige tile flooring, and center island

Beautiful kitchen with dark stained wood cabinetry, stainless steel appliances and tan quartz countertops

+18

Response time1 day

99 neighbors recently requested a quote

Recommended by92%of homeowners

Request Quote

A sustainable service

4.2(

)

Custom Cabinets - BuildFurniture - Build Custom

Serving Starke, FL and surrounding areas

Approved

Emergency services offered

Warranties offered

Small jobs welcome

"Huge shoutout to Mark Ritch with A Sustainable Service LLC! He recently Completed multiple repairs at our Archer property—from rebuilding and leveling our front/back steps to replacing our kitchen hood vent and fixing lighting fixtures. Mark was proactive, super communicative, and offered fair, honest, and budget-friendly choices. His experience shows in everything he does. Would definitely hire him again!"

17 neighbors recently requested a quote

Request Quote

...

Showing 1-10 of 146

Woodworking questions, answered by experts

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

It is common for a contractor to ask for a down payment before starting a project, especially for jobs that require purchasing materials and equipment or hiring a crew. The deposit amount can range from 10% to 50% of the total job cost. While a request for up to 50% is not unusual, a contractor should not ask for more than that, and you should never pay for a project in full before the work has begun. To protect yourself, always discuss payment terms before starting and have a written contract that outlines the project timeline and expectations. Additionally, be sure to hire reputable contractors and check their licensing and insurance before the project begins.

Yes, ceiling joists are typically load-bearing. However, their primary function is to support the weight of the ceiling and loads applied to it, like lighting fixtures and ceiling fans. They can also help support the roof, especially if they’re part of truss systems. Remember, the load-bearing capacity of ceiling joists depends on the material, size, and space between them.

Some states require carpenters to be licensed to perform forms of carpentry, such as framing. The license requires a certain amount of experience and to pass an examination. In states that don’t require carpenters to be licensed, they must be licensed as a contractor if they work independently rather than solely as a subcontractor under a licensed builder. Use Angi’s contractor licensing tool to find out whether a potential carpenter is licensed in your state.

Whether or not it’s easier to cut wood when it’s wet versus dry depends largely on the type of tool you use and the wood you’re cutting. For example, a chain saw should still be able to cut through wet wood with relative ease, but it may be more difficult to maneuver due to the wood fibers sticking to the chains of the saw.

However, you might want to avoid cutting wood entirely when it’s wet if you’re pruning your tree. Sawing a wet tree that you don’t plan on removing can also encourage bacterial and fungal growth and decay.

The Starke, FL homeowners’ guide to woodworking services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Sep 26, 2026Sep 26, 2026
How Much Do Carpenters Charge Per Hour? [2026 Data]
Find out how much carpenters charge, including average rates, cost factors, and tips to help you budget for your next carpentry project.
Lauren Bongard
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Refinish Stairs? [2026 Data]
Refinishing stairs is a great way to spruce up one of a home's most dominant focal points. High-quality wood should be allowed to shine. Learn the cost to refinish stairs in this guide.
Angi
•
Aug 17, 2026Aug 17, 2026
Built-In Bookshelf Building: Everything You Need to Know
Want to upgrade your home with custom shelving? Learn about built-in bookshelf building costs, design options, and how to hire a local carpentry pro.
Audrey Bruno
•
Aug 1, 2026Aug 1, 2026
10 Creative Projects You Can Make with Garden Scrap Wood
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Bookshelf Building Pro
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Kristin Salaky
•
Aug 4, 2026Aug 4, 2026
How to Choose the Right Sandpaper Grit for Your Project
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.