Get matched with top countertop and backsplash pros in Seffner, FL

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Caesarstone® offers both quartz and porcelain counters, which are types of engineered stone countertops. Generally, you can expect to pay $50 to $200 per square foot for quartz countertops. If you decide to go with Caesarstone® quartz counters, then you’ll pay $75 to $125 per square foot, which is in the mid-range of what most quartz manufacturers charge.

Additionally, Caesarstone® is typically less expensive than quartzite, which is a natural quartz countertop that costs $80 to $220 per square foot. Depending on the Caesarstone® countertop you choose, you may spend significantly more on quartzite counters.

While porcelain countertops are durable and don’t chip easily once installed, they aren’t chip-proof. If they’re subject to blunt force, chips, cracks, or other damage can occur. Unless you’re very confident in your installation abilities, hiring a local countertop installation company will reduce the risk of damage.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.