Get matched with top snow removal pros in Oneco, FL

It’s possible to use a torch to melt ice on your garage door, but we don’t recommend it. It’s very easy to bring the flame too close to the door, which can melt the weather stripping or even the garage door itself. You’ll melt ice quickly with a torch, but the damage you’re likely to cause can end up costing you a few hundred dollars to fix, which isn’t worth it. Instead, we recommend pouring hot water over the frozen area or using a less intense heat source, like a hair dryer or space heater.

When temperatures drop far enough, even rock salt can’t melt the ice. The briny solution freezes before it develops, and the salt doesn’t work, which happens around 10 to 15 degrees Fahrenheit. Keep in mind that wind chill and other factors impact ice-melting progress. Some ice melters, like magnesium chloride, work at colder temperatures and work better for deep winter freezes.

When starting the engine, you typically leave the choke on a snowblower in the "choke" or "closed" position. After starting, let the engine run for a few minutes to warm up. Then, gradually open the choke, moving it to the "open" or "run" position, allowing more air into the engine and transitioning to a normal fuel-air mixture. The exact duration varies based on the snowblower model and ambient temperature, but as a general rule, you should open the choke once the engine has stabilized and runs smoothly, typically within a few minutes.

Ice dam removal is costly, but it’s absolutely worth it. If you leave an ice dam as is and don’t take care of it, you’re looking at potentially dangerous situations and high-cost repairs—like roof collapse, leaks, mold problems, gutter damage, and more. Removing ice dams is essential to keeping your home and your family safe in the snowy season.