Get matched with top door pros in Cantonment, FL

Most modern door knobs will all fit in standard, modern doors, so if you know your door was made in the last 50 years or so, you should be fine buying a standard replacement door knob. The only exception would be a thumb latch handleset for an exterior door, as this type of door knob may not fit your door without drilling a mounting hole for the bottom of the handle. Antique or custom doors might also have different sizes and knob mounting holes, so call in a professional if you don’t believe your door is a standard one.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

A fire door can cost anywhere from $400 to $1,350 to purchase and have installed. The cost comes from the price of the door, which can be anywhere from $400 to $900 or more, and the cost of labor, which should be contracted out considering that fire doors are a safety measure. Most contractors will take between two and four hours to install one door.

Kick plates can absolutely be installed on metal doors. Many kick plates for metal doors are magnetic to avoid needing to drill into the metal, but many door manufacturers make kick plates that can be traditionally installed on metal doors using screws. Consult the manufacturer’s instructions to see which is recommended for your door model.