Get matched with top pre-made cabinet pros in Millville, DE

Before making any big plans, climb up a step ladder and closely examine the top of your cabinets. You’ll get to see what sort of clean-up work needs to be done, but you can also check for any unexpected obstacles. Sometimes this space holds electrical boxes, wiring, or even plumbing components. Those will affect plans to install a new layer of cabinets or shelves.

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.

Yes, you can replace the cabinet hardware after installation to change up the look of your cabinets. Replacing the hinges, handles, pulls, and knobs allows you the design flexibility to match your other appliances or finish schemes to your liking. Talk with your kitchen designer or cabinet installer about the best hardware option for your cabinets.

There are three primary ways to attach upper kitchen cabinets to a wall, and installers may use more than one method at a time. The most common method is to drive screws through the back of the cabinets and into studs in the wall behind. Sometimes cabinets are glued to the wall with strong adhesive. Often a combination of screws and adhesive is desirable. The last way is by hanging the cabinets on hardware brackets that attach to the wall before cabinet installation.