Get matched with top toilet pros in Niantic, CT

A bit of water in the bowl can help unclog a toilet, especially if you're using a plunger. However, if the bowl is full to the brim, you'll need to strap on gloves and remove some of the wastewater in a cup or container so it doesn't overflow when you try to unblock the pipe. If you're concerned about it filling further, manually close the flapper in the toilet tank or turn off the water supply to the toilet.

A broken flange could lead to serious issues. When a flange breaks, the toilet is no longer secured to the subfloor, which leads to constant rocking when in use. Over time, this breaks the wax seal between the toilet and flange and causes leaking throughout the substrate, bathroom floor, and ceilings below the bathroom.

Toilet handles can get stuck for a couple of reasons, but it’s commonly an issue with the chain. Remove the lid and check the chain’s connection, running from the flapper to the handle arm. Sometimes the chain gets snagged on or against another part of the tank. 

The chain might not have the right tension. For example, a chain that’s too short can make the handle feel stuck. Check that there’s some slack in the chain. Old, worn-out flappers can get stuck, too. In this case, you’ll need to see which size toilet flapper you need.

The cost of making a bathroom accessible can be $3,000 to $25,000, but you could spend as much as $50,000 building a brand-new ADA-compliant bathroom. Some bathroom accessibility upgrades to consider include:

• Installing grab bars: $100–$500 

• Lowering cabinets and vanities: $1,200–$2,500

• Installing modified doors: $700–$1,500

• Installing a modified toilet: $400–$1,000

• Installing an accessible sink and faucet: $100–$1,000

• Adding a walk-in tub: $1,100–$17,000

• Converting a bathtub into a walk-in tub: $350–$1,000

• Installing a wheelchair-accessible shower: $2,000–$7,500

• Installing a shower ramp: $16–$300