Get matched with top dishwasher installation pros in Durham, CT

Your dishwasher drains through a hose that attaches to the plumbing below your sink or snakes out the back of your machine. In most cases, you can access one side of the hose from below your sink, as it usually ties into the same drainline that your sink uses. Otherwise, you may need to pull the dishwasher out of the counter to access it.

To create a siphon break and remove any chance of dirty sink water or water that backs up into the sink from getting into your dishwasher, your dishwasher drain hose needs to have a high loop or an air gap device as part of its installation. All building codes require at least a high loop. In many places, it’s necessary to install an air gap device to meet the code.

The correct water temperature for your dishwasher depends on the washing phase. When water enters the machine, it should be around 120 degrees Fahrenheit, but no hotter than 150 degrees. During the wash cycle, the machine will heat the water to between 130 and 140 degrees. If your dishwasher has a sanitizing cycle, the water can reach a temperature of up to 180 degrees.

When a dishwasher discharges its wastewater, it uses a pump to quickly move a lot of water. If anything in the drain line or the garbage disposal impedes the high volume of water, it will back up into the sink through the drain or the garbage disposal. Following regular dishwasher maintenance tips like clearing clogs, keeping them cleared, and occasionally running the disposal will eliminate the problem.