Get matched with top sonic cleaning pros in Grand Junction, CO

You should avoid using a pressure washer on any surface or item that could be damaged by the high-pressure spray, as some materials are too delicate to withstand the force.

Key items and surfaces to avoid include:

• Electrical Components: Never pressure wash electrical systems, as water can cause short-circuits and create a safety hazard. This includes utility meters, breaker boxes, electrical outlets, generators, and HVAC or air conditioner units.

• Delicate and Fragile Materials: Fragile items can crack, shatter, or be stripped by the pressure. Avoid pressure washing windows, glass, light fixtures, shingled roofs (especially asphalt), and stucco.

• Painted, Stained, or Sealed Surfaces: Unless your goal is to strip the finish, do not pressure wash painted surfaces, stained wood (like decks), or anything with a protective seal that could be stripped away. Be especially cautious with older surfaces that may contain lead paint.

• Soft Woods and Certain Decking: Delicate surfaces like softwood, composite decking, and antique or wooden patio furniture can be etched or damaged. If you must wash wood, use a lower-powered pressure washer with a wide-angle nozzle to prevent damage.

• Living Things: Never use a pressure washer on people, pets, or plants. The force can cause serious injury and will destroy landscaping.

An improper DIY roof cleaning could cause leaks by damaging the roofing material. Things like using too much water pressure on the shingles or applying a harsh cleaning solution could cause damage. If you do enough damage, you could harm the ability of the shingles or other roof materials to keep water out of your home.

You may become so frustrated with the look of moss on your roof that you contemplate whether to clean or replace your roof. Fortunately, you don’t have to go as far as replacing it. After cleaning the moss, you can use a chemical solution to keep it away. For further protection, trim branches that overhang the roof, as fallen seed pods and leaves on the roof allow moisture to collect, encouraging moss growth. Consider adding zinc-coated flashing to the roof, too. As rain washes across the zinc, it leaves zinc particles behind that inhibit moss growth.

If you’re painting your home or monitoring a job as it’s being completed, squash the issue ASAP if you notice paint is getting onto the roof. Keeping it clean is one of the keys to extending your roof’s life.

Removing latex paint before it dries is much easier and lowers the risk of damaging your shingles (more on that below). Simply spray the spot with a hose for one to two minutes to clear away the drying paint. In general, this is a good way to remove ugly stains from your roof without using chemicals.