Get matched with top gas log pros in Cuchara, CO

While some building codes allow galvanized pipe for natural gas, it shouldn’t be used for propane. Propane can cause the pipe to wear down, leading to dangerous leaks. Instead of galvanized piping for propane, you should consider coated copper, black iron, or corrugated stainless steel tubing (CSST). For underground propane line installation, you can use polyethylene (PE).

The easiest way to empty a propane tank is to simply use it until no propane remains. If you’re short on time and need a faster solution, transfer the propane to another tank instead. Wear leather gloves to protect your hands, then connect the hoses from both propane tanks and seal them tightly. Turn the knob to open the supply tank valve on the full tank and let it run until the pressure pushes all the propane into the other tank. When all propane is transferred, remove the hose and seal each tank. 

Shut-off valves, like any other piece of metal hardware, can corrode, age, get worn down, and eventually break or rust into place. Occasionally spray your shut-off valve with WD-40 to stall it from rusting. If it really gets stuck, a wrench and WD-40 will usually do the trick, but you will need to call a plumber if it’s completely unmovable.

Installing a gas line can be extremely time-consuming and dangerous, so you will want to hire a seasoned professional. Perform a thorough search ahead of time to find a reputable and reliable plumber. Pay special attention to licensing and insurance as you go about choosing the best contractor for your needs.