Get matched with top foundation drain installation pros in Berthoud, CO

Test regularly, clean the pump, and inspect the discharge line to ensure efficient operation.

You can DIY basement waterproofing in some ways to help save on the overall costs. If your basement isn’t experiencing a lot of water but is noticeably humid, you can try running a dehumidifier that will pull the excess water out of the air. If you notice water leaking due to outdoor drainage issues, you can add downspout extensions to keep rainwater away from your home. 

However, if the problem is more severe and requires a more extensive solution, it’s best to call a basement waterproofing professional to assess the treatment you need and install waterproofing safeguards properly. Since keeping water out of your basement is important, ensuring this job is done correctly the first time is best.

Not all window wells have a formal drain, but they all require a method for water to flow away from the window. Some wells are connected to an interior or exterior drain tile, which is the most effective solution. Others rely on a deep layer of gravel or crushed stone that allows water to filter down into the soil.

However, if a window well lacks a proper drainage system, it can lead to basement seepage, costly water damage, mold growth, and potential foundation damage. This is especially true in areas with heavy rainfall or expansive soil.

If your window well doesn't have a drain or is not draining quickly enough, you have a few options. For gravel-based systems, the stone may have compacted and needs to be improved. For a more robust solution, you can hire a plumber or window installer to connect the well to a drainage system. This can also be a DIY project using a shovel or auger.

A sewage ejector pump is necessary if you have any plumbing fixtures, such as a bathroom, laundry room, or sink, located below the level of your home's main sewer line. Standard plumbing relies on gravity to move wastewater and solid waste to the municipal sewer or septic tank. However, for fixtures located below grade (e.g., in a basement), gravity is not sufficient.

The purpose of a sewage ejector pump is to actively pump this wastewater and solid waste upward into the main sewer line. Without an ejector pump in this situation, wastewater would have no way to exit and would eventually back up, causing a sewage overflow or flooding in your basement. If all of your home's plumbing is on the main floor or higher, gravity can handle the drainage, and an ejector pump is not needed.