Get matched with top woodworkers in Walnut Grove, CA

There are two ways you can cut trim for doorways: with a miter saw or a table saw. Mitered joints need a 45-degree angle. If you’re unfamiliar with a miter saw, you might want to consider buying extra trim pieces or choosing butted joints instead. One wrong cut, and you’ll need to power up the saw again with a new piece. 

Butted joints—also called shaker style—don’t need a 45-degree angle. Instead, your side pieces attach perpendicularly to the header trim and only require a straight cut.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

General contractors use subcontractors to complete specific parts of a construction project. For example, a general contractor might have construction experience but need a subcontractor to install plumbing lines in a new home.

Board and batten is a type of wainscotting that uses wider boards that are placed vertically, and it has a much more rustic aesthetic than wainscotting. Common wainscotting styles are raised-panel, flat-panel, and beadboard. Wainscotting is more intricate and will typically use more elegant, subtle trims compared to the more farmhouse-inspired boards of board and batten styles.