Get matched with top ceramic tile pros in Tulelake, CA

When cleaning porcelain tiles, avoid products that contain ammonia, bleach, and other harsh chemicals. Acid-based cleansers can damage the tile, though you can clean them with a diluted mixture of one-quarter cup white vinegar mixed with one gallon of hot water. It is important always to use a soft-bristled brush or sponge, since hard bristles and steel wool can scratch the tile.

On average, tiling a bathroom involves about 12 hours of labor, usually spread over two to three days to accommodate prep work and curing times. A professional tiler can often complete the installation in 6 to 8 hours, whereas a DIYer might take 10 to 16 hours. The total project time is influenced by factors like the bathroom layout, tile type, and necessary prep work, such as removing old tile. The process includes specific timelines for different areas; for example, tiling a floor takes about six hours, while a shower area can take six to ten hours. It is essential to allow for adequate curing time—typically 24 hours each—for the mortar, grout, and caulk, which is why the project extends over several days.

If the hearth ends against a wall, you can use a tile cutter as you normally would. However, if the edge of your hearth ends with no surface pressing against it,you may want to look into rounded tiles. These give a smooth edge to your hearth and make sure cut edges aren’t visible. You can also see if the tile you have has pieces that have been glazed or rounded on one edge. You’d then cut the tile and place it normally, with the cut edge facing inward. 

There are a few different tools you can use to score tiles. Manual tile cutters or tile scribes work well for scoring in straight lines. Tile nippers are one of the best options for scoring because they can make small and irregular cuts that larger tools may not be able to handle.