Top-rated floor cleaners and waxers.

Get matched with top floor cleaners and waxers in Sutter, CA

Enter your zip and get matched with up to 5 pros

Need a pro for your floor cleaning and waxing project in Sutter, CA?

Select your specific project to find the pro for you.

Find Floor cleaners and waxers in Sutter

Avatar for Tile and Grout Professionals
Tile and Grout Professionals
4.7(
6
)
Tile & Grout Cleaning - For Business

Serving Sutter, CA and surrounding areas

"Ron was terrific. The tile looks great and they repaired my kitchen floor tile with a tile left over from the initial installation. They even did the entryway tile that was not in the original estimate."
Recommended by100%of homeowners
Showing 1-10 of 35
Floor Cleaning and Waxing questions, answered by experts

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

A floor polisher won’t remove scratches from a wood floor, but the polish can fill in surface scratches and make them all but invisible. If you run your fingernail gently over the scratch and it doesn’t catch, chances are that the polish will hide it. If it does catch, you might want to have your floors fully refinished, and you might need to have a professional floor sander in for particularly deep scratches. When in doubt, call a professional floor polisher to determine if polish will fill in your scratches or if you need more in-depth services.

Most DIY floor cleaners don’t require rinsing, but you’ll want to make sure you don’t add too much dish soap or oil to the cleaner to avoid having to rinse it after cleaning. For non-wood floors, mix 8 parts warm water, 1 part vinegar, and 1 part baking soda with a few drops of dish soap. For wood floors, use olive oil in that same mixture instead of the vinegar. You can let these solutions air-dry after cleaning your floors with them, although you should manually dry your floors if they aren’t waterproof.

Using too much soap or floor cleaner can leave your laminate floors looking dirty or cloudy after mopping. Only use a teaspoon of soap or cleaning solution in a gallon of water. Additionally, always be sure to sweep or vacuum laminate floors before mopping to ensure you pick up dried grit, hair, and dust that can be harder to catch with a wet mop.

Most experts agree that the best thing with which to clean epoxy floors is a diluted mixture of ammonia and warm water. You can also use mild dish soap diluted with warm water or a degreaser (such as Simple Green or Goof Off) diluted with warm water. Some soap-based cleaners can leave a haze. If you notice this, further dilute the mixture with water or use a different detergent that does not leave a film. You should never use harsh cleaning chemicals, any type of acidic compound (such as vinegar or citrus-based cleansers), or harsh scrubbers like steel wool or hard bristle brushes.

The Sutter, CA homeowners’ guide to floor cleaning and waxing services

From average costs to expert advice, get all the answers you need to get your job done.