Best countertop and backsplash pros near Smith River, CA

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

A minimum overhang of 10 to 12 inches is generally recommended for countertop or island seating to provide enough legroom. For increased comfort, an overhang of 15 to 18 inches is ideal, allowing for more space and a relaxed experience. However, a 10-inch overhang can be sufficient in certain situations, such as for bar-height countertops, when using small stools, or in smaller kitchens where space is limited. Taller countertops may also require less overhang than shorter ones. Ultimately, you should consider your specific needs for legroom and measure to ensure the overhang fits comfortably within your kitchen's layout.

No, in most cases, you do not have to remove your countertops to reface cabinets. Since refacing primarily involves updating the doors, drawer fronts, and exterior surfaces, your existing countertops can usually stay right where they are, making the process quicker and less disruptive. However, if your counters prevent the access needed to remove doors and drawers, they may need to be temporarily removed. It's best to consult with a professional cabinet contractor to assess your specific kitchen layout during an estimate.

Fortunately, there are many types of heatproof countertops. Granite, quartzite, concrete, and stainless steel are all fiery contenders. These surfaces work best in busy kitchens where hot pots, pans, and baking sheets are part of the daily routine. Plus, their durability means you get a long-lasting work surface that won’t flinch at a bit of heat or heavy use. However, many stone and concrete counters require a sealer, which is typically not heatproof.