Get matched with top countertop and backsplash pros in Reedley, CA

Corian® is a popular countertop alternative to quartz. Created from an acrylic resin and natural minerals, Corian® resembles quartz and offers some similar benefits, but it comes at a cheaper price. Corian® countertops cost an average of $26 to $65 per square foot, which is less than half of what quartz countertops usually cost. The downside is that Corian® isn’t as durable as quartz, particularly regarding its resistance to scratches and high temperatures.

Recycled glass countertops are slightly cheaper than quartz countertops, though it depends on several factors. Recycled glass countertops cost between $65 and $140 per square foot, and quartz countertops cost $50 to $200 per square foot, though most projects come in at $70 to $100 per square foot. The final cost will come down to the quality of the material, local labor prices, and any customizations you require.

The short answer is yes. A stone-safe, pH-neutral cleaner and a soft cloth are all you need to clean and maintain terrazzo. Harsh cleaners aren’t necessary. You can also apply stone polish every few months to refresh your terrazzo.  

It’s recommended that you clean your terrazzo countertops daily to remove dust before it begins to build up. Dust and other debris can cause small scratches over time. If you spill something, be sure to clean it up immediately before stains set in.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.