Get matched with top welders in Redlands, CA

Q: How do you cut round ductwork?

• <div><p>Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.</p></div>

Q: How much does welding cost?

• <div><p>The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.</p></div>

Q: What is the best way to cut plexiglass?

• <div><p>This all depends on the tools you have on hand and whether you&rsquo;re trying to cut a straight line or shapes. </p><p>The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use. </p></div>

Q: Are hot water heaters good for scrap metal?

• <div><p>Since water heaters are primarily made of metal, they&rsquo;re commonly accepted by scrap yards and collectors. Don&rsquo;t expect to fetch a high price, though&mdash;water heaters are mostly steel and aluminum, which aren&rsquo;t high-value metals. Some components are made of more valuable metals, like brass and copper, but they&rsquo;re a small portion of the heater and won&rsquo;t affect the price much.</p></div>

Q: How much does it cost to hire a metal fabrication professional?

• <div><p>Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Redlands, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Redlands, CA

*The Angi rating for Welding companies in Redlands, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Redlands, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on August 23, 2024

Reviewed in August 2024
Max and his team at Twin Peaks Metal did a fantastic job from measurements to completion in 2 weeks for a custom gate and 80 feet of wrought iron fencing. The workmanship is beyond great with excellent welds to top notch installation with powder coating. Maxâ s prices were also very competitive...
Twin Ridge Metal
Request a quote
Reviewed in December 2023
They were fast and efficient. I think labor cost was expensive for the amount of time it took to complete the repair.
Expert Appliance Repair, Inc.
Request a quote
Reviewed in December 2023
Clean professional saw cutting for trenching thank you
JET CONCRETE CUTTING
Request a quote
Reviewed in November 2023
Tom with TNT Construction was great. He did some repairs on a new deck rebuild that the original contractor was responsible for but would not return to do. I wish TNT Construction had built my deck! The repairs look great and I am so thankful because my deck is now ready for rainy season. I...
T N T Construction
Request a quote
Reviewed in August 2023
If you need a Structural Engineer you call Ehab at Alpha Omega hands down! He is knowledgeable, professional and easy to do business with. Thank you
Alpha Omega
Request a quote
Reviewed in April 2023
Had a custom midpipe done by vicario steel for my hotrod. Excellent work, great customer service, zero complaints.
Vicario Steel
Request a quote
Reviewed in July 2021
Amazing job repairing stucco and color matching paint! You would never know it had been repairedâ ¦.blends perfectly with original. Very professional and hard working!
Barbee Plastering
Request a quote
Reviewed in August 2019
Roger's did an excellent job in cutting and shortening a wrought iron fence that was installed to close to my driveway. He was able to shorten the fence and welded it back in place to look as new. This was not an easy task as it evolved jack hammering, digging, cutting, welding, and cementing....
Roger's Welding & Fabrication
Request a quote
Reviewed in December 2018
Our old falling down wood gate is now replaced with a nice looking wrought iron and redwood gate thanks to Extreme Welding. Very pleased with Ken's work and timely completion of the job.
Extreme welding and fabrication
Request a quote
Reviewed in June 2016
We could no longer lock or even shut the outdoor security door because the top hinge had rusted and pulled out, which made the door hang down. A friend told me to get a portable welder. I always like to get someone that has good reviews on Angie?s List. For welding they all seemed to be based...
Greg Wood, Portable Welder
Request a quote

Find Welders in Redlands

H Q Welding Services

5.0(

)

Serving Redlands, CA and surrounding areas

Approved

In business since 2008

Emergency services offered

Customers say: Quick response

"Very friendly. J would recommend his services"

Response time1 day

10 neighbors recently requested a quote

Recommended by87%of homeowners

Request Quote

Alex Ortega Welding Fabrication Services

4.4(

)

Serving Redlands, CA and surrounding areas

Approved

In business since 2016

Free estimates

Credit card accepted

"Good service and good fellow, will use again."

+32

Response time2 days

Response rate99%

Recommended by50%of homeowners

Serving Redlands, CA and surrounding areas

Approved

In business since 2020

Free estimates

Emergency services offered

"Max and his team at Twin Peaks Metal did a fantastic job from measurements to completion in 2 weeks for a custom gate and 80 feet of wrought iron fencing. The workmanship is beyond great with excellent welds to top notch installation with powder coating. Maxâ s prices were also very competitive and I will certainly use him again if I need any additional metal or fencing work in the future. Thanks Max, Devin, and Garret for a job well done! ð ð »"

+13

Response time8 hrs

8 neighbors recently requested a quote

Recommended by80%of homeowners

Serving Redlands, CA and surrounding areas

In business since 2020

Free estimates

Emergency services offered

"The art piece turned out great!"

+59

Recommended by100%of homeowners

Serving Redlands, CA and surrounding areas

In business since 1995

Free estimates

Emergency services offered

"Dave Rogers did a terrific job of repairs various sections of fence. He was very reliable and thorough and is very talented in handling these kinds of repairs. We were very pleased with the final results and would highly recommend him to others needing similar work done."

Recommended by100%of homeowners

Serving Redlands, CA and surrounding areas

In business since 2024

Free estimates

Emergency services offered

"Hiring Palm steel welding was a great experience.The environment was professional, and Walter's expertise made it easy to get what i was looking for. I was very happy with his attention to detail.His commitment to quality work is evident. I will keep Palm steel welding in mind for future welding services reviewed by Marilyn"

Response time30 mins

Request Quote

OSD Quality Welding Services

5.0(

)

Serving Redlands, CA and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"They work with you and provide you with the best quality in welding,"

Recommended by100%of homeowners

Serving Redlands, CA and surrounding areas

In business since 2006

Free estimates

Emergency services offered

""One Water" employees are professional and courteous. System was installed in a few hours. It's been 2 weeks since we got the unit installed and we are happy with the quality of water that we are now able to get from every faucet in the house."

+11

Recommended by89%of homeowners

Request Quote

Metal Garage Doors and Gates

4.5(

126

)

Serving Redlands, CA and surrounding areas

In business since 2002

Free estimates

Emergency services offered

"2 person team completed the work quickly and cleanly. They found another part that was worn out and they went ahead and replaced it. I'm satisfied with the work that was done. I'd use them again."

+17

Recommended by90%of homeowners

Serving Redlands, CA and surrounding areas

Free estimates

Emergency services offered

"Very pleased with finished project. The workers were diligent friendly and responsive to homeowners questions and concerns. Project did run over budget due to more materials being needed. I would recommend their services."

+54

Recommended by100%of homeowners

Request Quote

Showing 1-10 of 43

Welding questions, answered by experts

Cutting round ductwork requires precision and the right tools. A duct cutter, specifically designed for circular ducts, is ideal. First, mark the cutting line on the duct using a measuring tape and pencil. Then, position the duct cutter's blade on the marked line. Apply steady pressure, rotating the cutter around the duct. The sharp blade creates a clean, precise cut. Alternatively, a reciprocating saw with a metal-cutting blade can be used for larger round ducts. Ensure the duct is securely held in place while making the cut to prevent slips and maintain accuracy.

The average cost for a welding project is about $300, with typical costs ranging from $125 to $490. However, prices can be as low as $125 for very small jobs or exceed $1,200 for large or complex projects. Welders typically charge an hourly rate between $65 and $150, depending on their experience, and many charge a minimum fee to cover overhead and travel expenses. The total cost is influenced by several factors, including labor, the cost of materials like metal rods and shielding gas, the type of metal being welded, the project's size and complexity, and your geographic location. For a precise quote, it's best to ask a local welder for an estimate based on your specific project.

This all depends on the tools you have on hand and whether you’re trying to cut a straight line or shapes.

The best tool to use for straight lines is either a circular saw or table saw. When cutting shapes, a jigsaw will be the easiest and most precise tool to use.

Since water heaters are primarily made of metal, they’re commonly accepted by scrap yards and collectors. Don’t expect to fetch a high price, though—water heaters are mostly steel and aluminum, which aren’t high-value metals. Some components are made of more valuable metals, like brass and copper, but they’re a small portion of the heater and won’t affect the price much.

Professional metal fabricators typically charge around $70 per hour, but the total cost of your project will depend on several factors. The largest cost drivers are the size, complexity, and design of the project, as well as the price and type of metal used. A good way to estimate the total cost is to multiply the cost of raw materials by four; typically, one-quarter of the total goes toward materials and three-quarters toward labor. Your geographic location can also influence costs, as labor and material prices vary by region.

The Redlands, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Apr 4, 2026Apr 4, 2026
How Much Does Wrought Iron Railing Repair Cost? [2026 Data]
Get expert insights on wrought iron railing repair cost, including average prices, key cost factors, and tips to save on your next project.
Angi
•
May 3, 2026May 3, 2026
How Much Does Awning Repair Cost? [2026 Data]
Discover the average awning repair cost, key price factors, and expert tips to help you budget and save on your next awning repair project.
Scott Dylan Westerlund
•
May 30, 2026May 30, 2026
How Much Does Sheet Metal Fabrication Cost? [2026 Data]
Get transparent sheet metal fabrication cost info for your project. Learn what impacts price, compare options, and plan your project with confidence.
Jacqueline DeMarco
•
May 2, 2026May 2, 2026
10 Types of Wire Fences for Yards and Farms
If you’re considering adding a wire fence to your property, you have choices. Keep reading for a breakdown of 10 types of wire fences.
Samantha Hawrylack
•
May 22, 2026May 22, 2026
How to Glue PVC Pipes Together So They’re Watertight
PVC requires specific solvent cement to form a proper bond that won't leak or come apart with pressure. Learn how to glue PVC pipes with this guide.
Stephanie Mickelson
•
Apr 9, 2026Apr 9, 2026
14 Types of Pipe Fittings and Their Uses
Tee, cross, wye, elbow, coupling, bushing, adapter, union, and more. Know the most common 14 types of pipe fittings and what they are suited for.