Get matched with top welders in Rancho Cucamonga, CA

Q: Is LVL more affordable than steel I-beams?

• <div><p>Yes, an LVL beam is more affordable than the <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">cost of a steel I-beam</a>, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you&rsquo;d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it&rsquo;s also more similar to traditional wooden beams and doesn&rsquo;t require as much retrofitting to connect joists. </p></div>

Q: Why should I pick steel I-beams?

• <div><p>Steel I-beams are an increasingly popular choice for supporting a structure because they support a large amount of weight with a small profile and without the need for load-bearing walls or supports underneath. This allows for more open floor plans, which most people tend to prefer. They also resist fire, pests, and rot and last for the lifetime of your home.</p></div>

Q: What factors affect custom metalwork costs?

• <div><p>Costs depend on metal type, fabrication complexity, labor, finishing, and shipping or installation requirements.</p></div>

Q: How much do different welding projects cost?

• <div><p>Some welding projects, such as <a href="https://www.angi.com/articles/cost-to-repair-leaking-pipe.htm">repairing pipes</a> or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:</p><ul><li><p>Metal furniture repair: $35&ndash;$100</p></li><li><p>Pipe repair: $200&ndash;$1,000</p></li><li><p>Small gates: $550&ndash;$750</p></li><li><p>Fencing: $1,200&ndash;$1,800</p></li><li><p>Fabricated sheet metal welding: $750&ndash;$2,500</p></li></ul><p></p></div>

Q: Do welders need to be licensed or certified?

• <div><p>Some states require welders to be licensed and certified, while others don&rsquo;t. However, it&rsquo;s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they&rsquo;re less likely to make a mistake that could be detrimental to your home. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to determine whether your potential hire has a welding license.</p></div>

There are 5 highly-rated local welders.

Need a pro for your welding project in Rancho Cucamonga, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Rancho Cucamonga, CA

*The Angi rating for Welding companies in Rancho Cucamonga, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Rancho Cucamonga, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on November 02, 2025

Reviewed in September 2023
My experience with Roger’s was fantastic! Once I placed my request in Angi Teri called me within minutes! Her customer service was second to none. She scheduled me for repair first thing the next day! David did an excellent job and I could not be more happy with the entire experience! I wish...
Roger's Welding & Fabrication
Request a quote
Reviewed in June 2017
Excellent. I called first for a free estimate, Someone came the next day and took photos. Next day, received a written estimate, much lower than the overpriced misguided 'other vendor.' Approved quote online and the next day, bright and early, the repairs were done. Benji replaced my bent,...
The Gatekeeper
Request a quote
Reviewed in June 2015
Fantastic. Method Garage Doors and Gates personnel (project managers, welders, gate and fencing builders) were very professional in designing, fabricating, installing the wrought iron pedestrian gates, a vehicle sliding gate, and the gate operator track. On the scheduled date of...
Method Doors & Gates
Request a quote
Reviewed in January 2014
Weld new hinges on gate door as the originals had broken because they were improperly mounted in the first place.
Greg's Portable Welding
Request a quote
Reviewed in March 2013
My rental had a leak from the upstairs tub down to the garage. Found Allison Plumbing off of this list and gave them a call. I got a prompt call back to verify the problem and was told the call would be sent out. Received a call back informing me that someone will be there at 4 PM but was...
Allison Plumbing
Request a quote
Reviewed in February 2013
I had a very pleasant auto repair experience with these guys. The muffler was literally falling off of my car. I looked on Angie's List and found the listing for Joe's Muffler. I pulled up to the garage and the mechanic waved me in. He gave me a really reasonable price which I accepted. He...
Joe's Muffler & Brakes
Request a quote
Reviewed in December 2012
The guy who came out made a lot of mistakes and use poor (even dangerous) workmanship. After re-plumbing the hot water heater, he either didn't notice or tell me that I also had a gas leak in the gas line to my hot water heater! I noticed it two days later, on my own, after he was long gone. In...
HITT PLUMBING CO
Request a quote
Reviewed in April 2011
The old downspout, that burst in heavy storms last winter, was custom made of welded metal. It had a welded, angular jog to get around a plumbing access opening in the wall. The new ABS downspout has a pre-fab rounded elbow at the top and a straight pipe to the ground. The cost of a new...
Iselt Handymen Services
Request a quote
Reviewed in November 2005
ON THIS PARTICULAR VISIT MY EXPERIENCE WAS VERY GOOD, I HAD A LEAK IN MY EXHAUST, THEY LOCATED IT IN A PART OF MY EXHAUST THAT WAS NOT LEGALLY REQUIRED TO BE THERE, SO THEY CUT IT OUT AND WELDED IN A NEW SECTION OF PIPE, ALL WITHIN HALF AN HOUR.
LA TORTUGA AUTO REPAIR
Request a quote

Find Welders in Rancho Cucamonga

Alex Ortega Welding Fabrication Services

580016 North Palm Springs,

4.80(

)

•Approved Pro

Alex Ortega Welding Fabrication Services

580016 North Palm Springs,

Customers say: Quick response

Recommended by 100% of Angi customers

9 years of experience

Here at Alex Ortega Movil Welding Fabrication Services we sustain our business on quality and integrity. We are experts in our trade for metal work including Welding, Fabrication, Wrought Iron etc. Also, we have a separate division of our business that does Solar Panel Cleaning. We are committed to quality from the beginning to the end of your project. We look forward to earning your business. Contact us today for a free estimate!

"They installed some outdoor stairs. Excellent communicators. Kept to a budget and stayed on a fast timeline."

Ahmed A on March 2024

"They installed some outdoor stairs. Excellent communicators. Kept to a budget and stayed on a fast timeline."

Ahmed A on March 2024

H Q Welding Services

H Q Welding Services

Customers say: Quick response

17 years of experience

Emergency services offered

With years of experience the industry, we are the experts you need to take care of your home or business. We handle everything from small repair to full service. We will treat your home as we would treat our own. Give us a call today. We look forward to working with you.

"They installed a hand railing at my front door that had to match the railing already installed ay my side door and they mailed it. Arrive on time, worked quickly and kept the work area neat. Swept up the after after they were done. Very happy with the job. 5 Stars. "

Sharon D on January 2025

"They installed a hand railing at my front door that had to match the railing already installed ay my side door and they mailed it. Arrive on time, worked quickly and kept the work area neat. Swept up the after after they were done. Very happy with the job. 5 Stars. "

Sharon D on January 2025

IE Welding Services

8390 Hermosa Ave

No reviews yet

IE Welding Services

8390 Hermosa Ave

No reviews yet

1 years of experience

Specializing in: • Gate Repair and/or Modification • Fence Repair and/or Modification • Custom Metal Fabrication

Welding jyb

No reviews yet

Welding jyb

No reviews yet

8 years of experience

Aluminum welding repair fabricator Steel welder Stainless steel welding Galvanized steel welding Cast aluminum motor motor cycle Metal welding Building fabricator frames pipes truck car frame trailer car exhaust heavy equipment excavator skidsteer tractor suspension gate repair striped bolt removal engine motor block repair mobile welding and repair services available big or small jobs accepted please contact me here mobile service 840. 202. 851zero

GT Steel Inc.

738 Lewis St

5.00(

)

GT Steel Inc.

738 Lewis St

5.00(

)

Customers say: Quick response

Recommended by 100% of Angi customers

Gt Steel Inc is a full-service metal fabrication company specializing in custom welding, structural fabrication, and repair solutions. We cater to various industries, including construction, manufacturing, and residential clients, providing high-quality, durable, and precision-crafted metal products. Our skilled team utilizes advanced welding techniques and cutting-edge equipment to meet each project's specifications. At GT Steel Inc, we are committed to delivering exceptional craftsmanship, reliable customer service, and timely project completion, ensuring every job meets the highest standards of quality and safety. Whether you need custom metalwork or repairs, GT Steel Inc is your trusted partner for all things metal. Call or Text Us Now!

"Great!...reasonable price, the work was completed on time in a professional manner, I would definitely recommend GT Steel to friends and family."

Ernest T on January 2025

"Great!...reasonable price, the work was completed on time in a professional manner, I would definitely recommend GT Steel to friends and family."

Ernest T on January 2025

A handyman who has welding certs and installs gates near you. I am currently in the union and makes sure your business isy number one priority. I start a project and finish it like it was my own.

Fencing,D.S-B.C

No reviews yet

Fencing,D.S-B.C

No reviews yet

* PUERTAS vinil y metal *CERCADOS de vinil * trabajo abuen precio + 48 por pie

Raw steel

No reviews yet

Raw steel

No reviews yet

Raw Steel is a structural steel erector, miscellaneous iron, and production welding construction company in Los Angeles. With more than 16 years of experience, we have worked on countless projects, providing the best services and solutions to our clients. Contact us today to learn more about our services. 5633244421

GZ DESIGNS

No reviews yet

GZ DESIGNS

No reviews yet

GZ Fab delivers top-tier welding and fabrication solutions tailored to meet diverse project needs. With a focus on precision and innovation, we bring expertise and craftsmanship to every endeavor. Our mobile service ensures seamless accessibility, enabling us to deliver exceptional results directly to our clients' doorstep. At GZ Fab, we transform metal into artistry, one project at a time.

...

Showing 1-10 of 201

Welding questions, answered by experts

Yes, an LVL beam is more affordable than the cost of a steel I-beam, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists.

Steel I-beams are an increasingly popular choice for supporting a structure because they support a large amount of weight with a small profile and without the need for load-bearing walls or supports underneath. This allows for more open floor plans, which most people tend to prefer. They also resist fire, pests, and rot and last for the lifetime of your home.

Costs depend on metal type, fabrication complexity, labor, finishing, and shipping or installation requirements.

Some welding projects, such as repairing pipes or fences, require travel, whereas others, like furniture repair, do not necessarily require the welder to come to you. Travel and overhead factor into the overall cost of your welding project. Some of the most common welding projects include:

Metal furniture repair: $35–$100
Pipe repair: $200–$1,000
Small gates: $550–$750
Fencing: $1,200–$1,800
Fabricated sheet metal welding: $750–$2,500

Some states require welders to be licensed and certified, while others don’t. However, it’s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they’re less likely to make a mistake that could be detrimental to your home. Use Angi’s state licensing tool to determine whether your potential hire has a welding license.

The Rancho Cucamonga, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Aug 15, 2025Aug 15, 2025
How Much Does Welding Cost? [2025 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.

Get matched with top welders in Rancho Cucamonga, CA

There are 5 highly-rated local welders.

Need a pro for your welding project in Rancho Cucamonga, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in Rancho Cucamonga, CA

Find Welders in Rancho Cucamonga

Alex Ortega Welding Fabrication Services

Alex Ortega Welding Fabrication Services

H Q Welding Services

H Q Welding Services

IE Welding Services

IE Welding Services

Welding jyb

Welding jyb

GT Steel Inc.

GT Steel Inc.

George

George

Rodriguez ironworks

Rodriguez ironworks

Fencing,D.S-B.C

Fencing,D.S-B.C

Raw steel

Raw steel

GZ DESIGNS

GZ DESIGNS

The Rancho Cucamonga, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Get our Angi-powered app

Get matched with top welders in Rancho Cucamonga, CA

There are 5 highly-rated local welders.

Need a pro for your welding project in Rancho Cucamonga, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in Rancho Cucamonga, CA

Find Welders in Rancho Cucamonga

Alex Ortega Welding Fabrication Services

Alex Ortega Welding Fabrication Services

H Q Welding Services

H Q Welding Services

IE Welding Services

IE Welding Services

Welding jyb

Welding jyb

GT Steel Inc.

GT Steel Inc.

George

George

Rodriguez ironworks

Rodriguez ironworks

Fencing,D.S-B.C

Fencing,D.S-B.C

Raw steel

Raw steel

GZ DESIGNS

GZ DESIGNS

The Rancho Cucamonga, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in Rancho Cucamonga? Check surrounding areas for Welders.

Which Welding task are you tackling?Find Rancho Cucamonga Welding services on Angi who specialize in any of these tasks