Get matched with top deck cleaning pros in Parlier, CA

Parlier homeowners rate deck cleaning pros in our network

4.8

(26 reviews)

Top-rated deck cleaning pros.

Need a pro for your deck cleaning project in Parlier, CA?

Select your specific project to find the pro for you.

Find Deck cleaning pros in Parlier

Avatar for Perfectus Pressure Wash
Perfectus Pressure Wash
5.0(
3
)

Serving Parlier, CA and surrounding areas

In business since 2023

Free estimates

Credit card accepted

Perfectus Pressure Wash is the Central Valley's leading expert in all things exterior cleaning!\n\nOur expertise goes far beyond traditional building and flat surface pressure washing methods. We understand that water and pressure alone are not the most thorough, safe, nor efficient ways to tackle many different situations.\n\nThat’s where Soft Washing comes in. Whether it’s rust, oil, calcium/efflorescence, or organic matter (moss, mildew, mold, algae, cobwebs), we understand the chemistry involved in removing just about any type of stain. Our cutting-edge systems are tailored to any of these situations— we really have this down to a science!\n\nWe are fully insured and licensed for all residential, commercial, and public works projects. Paired with one year in business and 13+ years of pressure washing experience, Perfectus is the most dependable, professional choice for all of your exterior cleaning needs.\n

Roof Wash Prep.
Roof Wash
Roof Wash
Surface Clean
Gutter Cleaning

+13

Response time3 hrs
Recommended by66%of homeowners
Ceasar Briones Construction
4.3(
3
)

Serving Parlier, CA and surrounding areas

In business since 2009

Credit card accepted

"When I discovered that I had a major problem with my house and that it was in jeopardy of collapsing, I had to act quickly to get temporary shoring in place and also get a structural engineer and architect on board to get the designs moving.  I met Ceaser Briones, of Briones Construction, and walked him through the requirement to shore up the ceiling to prevent the house from collapsing.  Briones Construction jumped in and went to work immediately and helped me save my house.  They didn't take advantage of my situation by trying to overcharge me.  I know because I build facilities and maintain them for a living, and know how much it should cost to do the work.
Once all of the shoring was in place, we focused on the structural and architectural designs to make the necessary structural repairs and to remodel the house.  Briones Construction was instrumental in helping the architect and structural engineer with field measurements and confirming as-built conditions.  Once the designs were finished and permits pulled, Briones Construction didn't hesitate a moment to get started with the work.  They coordinated every aspect of the job, including moving my furniture, fencing the site, bringing in a roll off trash bin, etc.   They knew what they were doing and were very professional.  Briones Construction's work was meticulous and every detail was addressed.  Their quality was outstanding in every respect."
Recommended by100%of homeowners
Showing 1-10 of 16
Deck Cleaning questions, answered by experts

Cutting the boards directly is one of the fastest ways to remove deck boards with hidden fasteners. Mark two parallel lines that are one-third of the total measurement on both ends and cut out the centerpiece. Then, remove the end of the board that doesn’t have a fastener. Finally, pry open the fastened side and pull it up to pop out the screw or access the fastener. This also allows you to salvage portions of boards for other projects.

An above-ground pool with a deck can increase your home's value by as much as 4% to 7%, but it depends on your local climate, potential buyers, and the size and condition of your pool. Some buyers see a pool as a liability instead of a luxury, especially if it's at the end of its life span. In general, it's best to add a pool and deck to your property if it will bring you enjoyment—not because it raises the value of your home.

Most building codes require that spindles or balusters on deck and stair railings be spaced no more than four inches apart. This safety standard, often called the '4-inch sphere rule,' is designed to prevent small children or pets from slipping through the railing. A good way to visualize this is that a 4-inch sphere should not be able to pass between two spindles. For the same safety reason, the space between the bottom rail and the deck floor should also be no more than four inches. As a general guideline, professionals often install three balusters per foot of railing. However, since specific requirements can vary by location, it is crucial to check your local building codes to ensure compliance before starting your project.

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. 

Unless you’re using a 2-in-1 formula or painting over an existing coat of paint, it pays to apply a coat of primer ahead of your new paint. Decks see a lot of footfall and exposure to extreme and sudden temperature changes and moisture levels. The primer promotes better paint adhesion, moisture repellency, and a smoother finish, which means you’ll often need fewer coats of paint. 

The Parlier, CA homeowners’ guide to deck cleaning services

From average costs to expert advice, get all the answers you need to get your job done.