Get matched with top countertop and backsplash pros in North Fork, CA

New countertops can last for anywhere between 15 and 50 years, with the exact lifespan depending on the material:

• Quartz: 50 to 100 years

• Marble: 50 to 100 years

• Granite: 50 to 100 years

• Laminate: 15 to 20 years

• Concrete: 20 to 30 years

• Tile: 40 to 100 years

Keep in mind some materials are more likely to stain and chip than others, which is an important factor to consider when it comes to the longevity of your countertops. Some materials also need special cleaning and maintenance, like tile countertops, which need grout cleaning, and concrete countertops, which need resealing.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

Avoid using harsh, gritty, or abrasive cleaners and sponges on Formica countertops. This includes steel wool, scouring pads, and strongly alkaline or acidic cleaning products like chlorine bleach, oven cleaner, drain cleaner, furniture polish, or vinegar. These can compromise the surface, leading to scuffs, discoloration, and other damage that will reduce the countertop's longevity. Additionally, never place hot items, such as pots and pans directly from the oven or stovetop, onto the laminate surface, as the high heat can cause it to scorch.